Fishing ions: this review provides a comprehensive analysis of different approaches in utilizing capacitive deionization (CDI) for selective ion separations and ion removal.
Selective removal of ions from water via capacitive deionization (CDI) is relevant for environmental and industrial applications like water purification, softening, and resource recovery. Prussian blue analogs (PBAs) are proposed as an electrode material for selectively removing cations from water, based on their size. So far, PBAs used in CDI are selective toward monovalent ions. Here, vanadium hexacyanoferrate (VHCF), a PBA, is introduced as a new electrode material in a hybrid CDI setup to selectively remove divalent cations from water. These electrodes prefer divalent Ca2+ over monovalent Na+, with a separation factor, βCa/Na ≈3.5. This finding contrasts with the observed monovalent ion selectivity by PBA electrodes. This opposite behavior is understood by density functional theory simulations. Furthermore, coating the VHCF electrodes with a conducting polymer (poly‐pyrrole, doped with poly‐styrenesulphonate) prevents the contamination of the treated water following the degradation of the electrode. This facile and modular coating method can be effortlessly extended to other PBA electrodes, limiting the extent of treated water contamination during repeated cycling. This study paves the way for tunable selectivity while extending the library of electrodes that can be successfully used in (selective) CDI.
Capacitive deionization (CDI) is a desalination technique that can be applied for the separation of target ions from water streams. For instance, mono- and divalent cation selectivities were studied by other research groups in the context of water softening. Another focus is on removing Na+ from recirculated irrigation water (IW) in greenhouses, aiming to maintain nutrients. This is important as an excess of Na+ has toxic effects on plant growth by decreasing the uptake of other nutrients. In this study, we investigated the selective separation of sodium (Na+) and magnesium (Mg2+) in MCDI using a polyelectrolyte multilayer (PEM) on a standard grade cation-exchange membrane (Neosepta, CMX). Alternating layers of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were coated on a CMX membrane (CMX-PEM) using the layer-by-layer (LbL) technique. The layer formation was examined with X-ray photoelectron spectroscopy (XPS) and static water contact angle measurements (SWA) for each layer. For each membrane, i.e., the CMX-PEM membrane, CMX membrane, and for a special-grade cation-exchange membrane (Neosepta, CIMS), the Na+/Mg2+ selectivity was investigated by performing MCDI experiments, and selectivity values of 2.8 ± 0.2, 0.5 ± 0.04, and 0.4 ± 0.1 were found, respectively, over up to 40 cycles. These selectivity values indicate flexible switching from a Mg2+-selective membrane to a Na+-selective membrane by straightforward modification with a PEM. We anticipate that our modular functionalization method may facilitate the further development of ion-selective membranes and electrodes.