This article presents the results of a design study of an electron-optic system (EOS) for a sheet-beam G-band traveling-wave tube. An electron gun providing a 0.1-A, 20-kV sheet beam emitted by a 0.8 mm x 0.8 mm curved cylindrical cathode is designed. The beam dimensions at waist position are 0.05 mm x 0.8 mm with a compression ratio of 16 in the vertical direction. A magnetic system providing 1.1 T magnetic field, which is nearly seven times higher than the Brillouin field, is designed, and beam transmission in the 0.1 mm x 0.85 mm beam tunnel is studied by 3-D particle-in-cell (PIC) simulation. It is demonstrated that the beam has a complex structure of particle distribution, i.e., a high-density central part (core) and a peripheral low-density part (halo). The effect of assembly tolerance on beam transmission is studied. The prototype gun is fabricated, which compresses the beam to 0.1 mm by electrostatic field only. The 135-mA current with 95% transmission through the 0.2-mm anode aperture is measured.
1 January 2014 in Radiophysics and Quantum Electronics
A traveling-wave tube of the millimeter range belonging to the short-wavelength region with a sheet electron beam and a slow-wave structure of the double grating type is studied. Its dispersion...
Results of studying the cathode–gate structure based on carbon nanotubes (CNTs) are presented. Experimental samples of a matrix field emission cathode–gate structure based on a vertical array of CNTs with a cell diameter of 1 μm and microstructure period of 5 μm have been manufactured. Based on experimental data, an electron-optical system with a ribbon-type field emission CNT based cathode with a linear convergence of 6.25 and beam-current density of 4.46 A/cm2 has been proposed. Results of modeling a sheet 0.16-mm-thick electron beam formed by an electron gun with a CNT cathode demonstrated the possibility to obtain a low-perveance flow with a small deformation in the 0.3 × 0.8-mm beam tunnel of a slow wave 25-mm-long structure.