30 January 2023 in Infrared Physics & Technology
23 April 2023 in NDT & E International
1 December 2020 in Wave Motion
22 February 2023 in Nondestructive Testing and Evaluation
Delamination is unavoidable during the fabrication or utilisation of carbon fibre reinforced polymer (CFRP) components. Due to the high sensitivity of the A0 mode for detecting delamination, nonlinear frequency mixing of counter-propagating A0-S0 mode Lamb waves was numerically and experimentally investigated in the CFRP composite plate. Considering the nonlinear effect caused by the heterogeneous structure of CFRP composite, the counter-propagation of primary Lamb waves can minimise the nonlinear interaction induced by material nonlinearity compared to the one-way propagation. Numerically, the nonlinear interaction between primary Lamb waves and delamination was investigated. Moreover, delaminations with different sizes, depths, and interface gaps were explored. It was found that the acoustic nonlinear parameter grows with expanding delamination size and diminishes with increasing delamination depth and interface gap. Furthermore, the nonlinear frequency mixing of counter-propagating A0-S0 mode Lamb wave was experimentally performed. The nonlinear frequency mixing effect induced by the delamination can be maximally isolated from the material nonlinearity. Consequently, the technique based on the nonlinear frequency mixing of counter-propagating A0-S0 mode Lamb waves provides a potential and effective method to detect defects in the composite plate with heterogeneous structures.
27 January 2016 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Carbon fiber–reinforced plastics have been widely applied in aerospace industry as aircraft structural components due to their excellent mechanical and physical properties. The countersinking process of the carbon fiber–reinforced plastic hole is indispensable for the assembly of countersunk head screw. In conventional countersinking process of carbon fiber–reinforced plastics, it is prone to produce the delamination, fiber pullout, poor surface levelness and dimensional accuracy of countersunk hole. As a new technology, the rotary ultrasonic elliptical machining for countersinking of carbon fiber–reinforced plastics is employed, which is a non-traditional process that can effectively improve the surface levelness, surface integrity and machining accuracy of carbon fiber–reinforced plastic countersunk hole. This article reported a feasibility study on the rotary ultrasonic elliptical machining for countersinking of carbon fiber–reinforced plastics without coolant for the first time. The processing principle of rotary ultrasonic elliptical machining for countersinking was illustrated according to the countersinking models and the equations of motion locus. Based on the principle analysis, the surface levelness, tool blades’ path and countersunk hole surface morphology in rotary ultrasonic elliptical machining of the separated and unseparated types were analyzed compared to that in conventional countersinking. In addition, the rotary ultrasonic elliptical vibration transducer was designed and fabricated, as well as the experimental platform was set up. The experimental results demonstrated that the rotary ultrasonic elliptical machining achieved much better results than that in conventional countersinking, such as lower thrust force, torque, cutting temperature, better surface levelness, hole dimensional accuracy, surface integrity and chip-removal effect. The experimental results also verified the feasibility of rotary ultrasonic elliptical machining for countersinking of carbon fiber–reinforced plastics.
1 May 2024 in Infrared Physics & Technology