14 March 2005 in IEEE Transactions on Antennas and Propagation
A rigorous method for characterizing, in terms of a multimode scattering matrix, a finite array of antennas where each antenna can be described by means of spherical waves is presented in this paper. The procedure provides the impedance, coupling and radiating characteristics of the arrays and comprises two steps. First, the generalized scattering matrix (GSM) of each single antenna is numerically calculated over a wide band of frequencies. For this purpose we use a previously-developed methodology that combines the domain segmentation technique, the three-dimensional finite element method (3D-FEM), spherical mode expansion and a reduced order model obtained using a symmetric matrix Pade/spl acute/-Via-Lanczos (SyMPVL) algorithm. Second, the overall GSM of the finite array is calculated starting from the GSM of each antenna and using rotation and translation of spherical waves. A closed-form expression for the overall GSM is given and different examples are shown in order to validate the proposed method.
1 September 1999 in IEEE Transactions on Microwave Theory and Techniques
A method of analysis of passive microwave circuits based on the segmentation concept is introduced. Complex three-dimensional (3-D) structures are divided into regions delimited by arbitrarily shaped waveguide ports, in which a modal expansion of the field is made. Waveguides can also be filled with inhomogeneous and/or anisotropic media. The regions are analyzed by the mode-matching method (MM) combined with either a two-dimensional (2-D) finite-element method (2-D FEM/MM) or a 3-D FEM (3-D FEM/MM). Open regions are dealt with using the perfectly matched layer. The result of the 3-D FEM analysis is a multimode multiport generalized admittance matrix, from which a generalized scattering matrix is computed. Finally, the method is applied to the analysis of a coax-to-waveguide transition and of a pair of unshielded microstrip lines coupled through an aperture in the common ground plane.
1 May 2012 in IEEE Transactions on Antennas and Propagation
The analysis of a 1.2-meter, contour-shaped reflectarray antenna through the use of Artificial Neuronal Networks (ANNs) is carried out in this paper. The analysis is a two-step procedure: reflectarray element modeling and pattern synthesis. In the first step, artificial neural networks are found to reproduce both the amplitude and the phase of the complex reflection coefficient of the three-layered reflectarray element. For this task, up to 9 free input parameters are considered: six geometrical parameters, the incident angle in terms of azimuth, θ, and elevation, φ, and the frequency. Because of this large number of free parameters, a new artificial neural network training methodology has been developed regarding both the training set and the training process itself. In the second step, extensive full wave electromagnetic computation is replaced by trained artificial neural networks to calculate the electric field on the planar structure and the radiation pattern. A good agreement is obtained compared to an analogous analysis carried out by Method of Moments. Thanks to this methodology, the speed up factor in terms of time is in the order of 7×102, which represents a significant improvement in Computer Aided Design (CAD) of reflectarray antennas.
1 January 2002 in IEEE Antennas and Wireless Propagation Letters
A methodology that combines the domain segmentation technique, the three-dimensional finite-element method (3-D FEM), and a symmetric matrix Lanczos-Pade algorithm, is used for the fast frequency-sweep analysis of cavity-backed microstrip antennas by using a spherical mode expansion on the radiation boundary. Results for a circular patch antenna validate the proposed method.
1 March 2001 in IEEE Transactions on Microwave Theory and Techniques
A hybrid method based on the segmentation technique, the finite-element method, and a matrix Lanczos-Pade algorithm (SFELP) for the analysis of microwave circuits is introduced in this paper. This method computes symmetric matrix-Pade approximations of a matrix transfer function for any number of inputs and outputs via a Lanczos-type process (SyMPVL) for obtaining the generalized admittance matrix of a microwave circuit on a wide band of frequencies. The formulation that provides the three-dimensional finite-element/segmentation method is suitable for applying the symmetric Pade via Lanczos algorithm, except for the frequency dependence of the matrix of excitation vectors. In this paper, this problem is analytically overcome for the case in which excitation vectors correspond to modes of homogeneous waveguides or transmission lines. The accuracy and efficiency of the proposed method are shown by means of different examples.
18 December 2014 in IEEE Transactions on Antennas and Propagation
A general method to obtain a matrix which allows the compensation of mutual coupling effects in transmitting arrays for the total field in all directions is introduced. This method is independent of the numerical method used in the analysis and it can include the effect of the antenna platform. The starting point can be the active element patterns or the spherical mode expansion from spherical near-field antenna measurements. Additionally, the spherical mode expansion is also used to find a matrix which allows the compensation of mutual coupling effects in receiving arrays. Through this theory, a simple relation between the compensation matrices of the transmitting and the receiving arrays is found. As a consequence, the scattering matrix of a circuit that allows the simultaneous compensation of mutual coupling effects for the transmission and the reception problem can be easily defined. Finally, it will be shown how the capabilities of the compensation in all directions depend strongly on the array element.