We present the results of the first commissioning phase of the short-focal-length area of the Apollon laser facility (located in Saclay, France), which was performed with the first available laser beam (F2), scaled to a nominal power of 1 PW. Under the conditions that were tested, this beam delivered on-target pulses of 10 J average energy and 24 fs duration. Several diagnostics were fielded to assess the performance of the facility. The on-target focal spot and its spatial stability, the temporal intensity profile prior to the main pulse, and the resulting density gradient formed at the irradiated side of solid targets have been thoroughly characterized, with the goal of helping users design future experiments. Emissions of energetic electrons, ions, and electromagnetic radiation were recorded, showing good laser-to-target coupling efficiency and an overall performance comparable to that of similar international facilities. This will be followed in 2022 by a further commissioning stage at the multi-petawatt level.
The ultrafast dynamics of the loss of crystalline periodicity is investigated in femtosecond laser heated warm dense copper, by the original use of x-ray absorption near-edge specific structures just above the edge. The characteristic time is observed near 1 ps, for specific energy density ranging from 1 to , using ps-resolution x-ray absorption spectroscopy. The overall experimental data are well reproduced with two-temperature hydrodynamic simulations, supporting a thermal phase transition.
Nonequilibrium warm dense copper produced by a femtosecond optical laser pulse is investigated with x-ray absorption near-edge spectroscopy. A laser-plasma-based tabletop device is set up to probe a pre-edge structure observed near the edge with a picosecond resolution. Careful ab initio calculations are used to retrieve the electron temperature evolution up to equilibration with ions. Measurements are well reproduced by two-temperature model calculations based on temperature-dependent parameters, provided that the hydrodynamic expansion is taken into account. At the highest temperatures investigated (), the last affects significantly the energy balance between electrons and ions.
The ultrafast electron energy transport is investigated in laser-heated warm dense copper in a high flux regime ( absorbed). The dynamics of the electron temperature is retrieved from femtosecond time-resolved x-ray absorption near-edge spectroscopy near the Cu edge. A characteristic time of is observed for the increase in the average temperature in a 100 nm thick sample. Data are well reproduced by two-temperature hydrodynamic simulations, which support energy transport dominated by thermal conduction rather than ballistic electrons.
We present the results of the second commissioning phase of the short-focal-length area of the Apollon laser facility, located in Saclay, France. This phase was conducted using the main laser beam (F1), scaled to a peak power of 2 PW. Under the tested conditions, the F1 beam delivered on-target pulses with a maximum energy of up to 45 J and a duration of 22 fs. Several diagnostics were deployed to assess the facility's performance. Key measurements included the on-target focal spot and its spatial stability, along with characterizations of secondary sources generated by irradiating solid targets. These evaluations aim at assisting users in designing future experiments. The laser-target interactions were thoroughly characterized, with emissions of energetic ions, x rays, and neutrons recorded, demonstrating good laser-to-target coupling efficiency. Additionally, we successfully demonstrated the simultaneous operation of the F1 beam with the auxiliary 0.5 PW F2 beam of Apollon, enabling dual-beam operation. This commissioning phase paves the way for the next stage in 2025, which will involve scaling the F1 beam to 8 PW, progressing toward the ultimate goal of achieving 10 PW power.