27 April 2023 in Measurement Science and Technology
The metrological structural resolution (MSR) describes the size of the smallest surface feature that can be measured dimensionally with a given accuracy. Several methods to determine the MSR for dimensional x-ray CT (dXCT) have been proposed in the past, two of which are compared and related in this publication, i.e. the curved-edge based (CEB) and the profile-based spectral (PBS) method. Both methods consider the surface structure as being described by a single surface on the relevant local scale and are also suitable for the application to optical or tactile coordinate measurement systems (CMSs). The CEB method evaluates the radii of circular shapes to determine the width of the Gaussian filter that describes the filtering of the surface by the CMS. The PBS method evaluates the instrument transfer function (ITF) determined by means of the measurement of a surface profile with a broad-band spatial frequency spectrum with a finite cut-off frequency. The PBS method yields the threshold wavelength for which the amplitude of the ITF drops below a certain level. While the resulting quantities of the two methods are very different they evaluate the same characteristic of the CMS. In this publication an analytical relation between those results is derived and shown to exist which is used to define the MSR. Simulated CT scans as well as dXCT measurements are performed to verify this relation. The results for the MSR obtained from both methods are consistent and deviations to the expectations based on theory are within a reasonable range.
7 May 2026 in TM - Technisches Messen
Zusammenfassung: Additiv gefertigte (AF) Bauteile finden immer häufiger industrielle Anwendung. Um die geforderte Qualität dieser Bauteile sicherzustellen, sind zahlreiche Prüfungen und ein hohes Maß an Dokumentation erforderlich, insbesondere weil die Materialeigenschaften und Maßhaltigkeit stark von den Bedingungen während des Druckprozesses beeinflusst werden. Daher wurde im Projekt „QI Digital“ ein digitaler Prüfbericht entwickelt, in dem die Prüfergebnisse maschinenlesbar und -interpretierbar hinterlegt sind und damit die Dokumentation vereinfacht. Grundlage hierfür sind die Normen ISO/ASTM 52908 und ISO/ASTM 52902. Diese Normen legen die Anforderungen für eine Qualifizierung von AF-Materialien und -Bauteilen fest und ermöglicht eine standardisierte Qualitätskontrolle. Um diese Qualifizierung eines Musterbauteils zu demonstrieren, wurde im Projekt eine Prüfplattform als CAD-Model entworfen. Diese wird wiederholt und mit verschiedenen Prozessparametern gefertigt, um nachzuweisen, dass ein unter diesen Prozessbedingungen gefertigtes Bauteil die Spezifikationen erfüllt. Dafür enthält die Plattform neben dem Bauteil verschiedene Prüfkörper für mechanische und geometrische Prüfungen. Die Ergebnisse dieser Prüfungen müssen im digitalen Prüfbericht dokumentiert werden und geben somit dessen Aufbau vor. Als Format für den digitalen Prüfbericht wurde das XML-Schema des digitalen Kalibrierscheins (DCC) gewählt. Der DCC bietet eine unabhängige allgemeine Struktur für die Dokumentation von Ergebnissen und ermöglicht es so, alle Prüfergebnisse für die Qualifizierung von AF-Bauteilen in einem Dokument maschineninterpretierbar darzustellen.