25 February 2022 in Water Resources Research
Debris flows are one of the most serious natural disasters on Earth and cause great losses in human life and property each year. Check dams have been widely utilized in debris flow hazard mitigation, and over time, some control projects have exceeded their designed service lifetime. However, the processes of stored sediment erosion with multiple surges of debris flows after check dam removal are unknown. Here, the stored sediment erosion processes associated with different reductions in the dam height (i.e., the removed height) were revealed by physical experiments. The results showed that erosion was concentrated on the stored sediment scarp formed by dam removal and that the erosion process mainly included undercutting and widening. The erosion efficiency of the debris flow gradually decreased with the development of erosion and was positively correlated with removed height, negatively correlated with the accumulated debris flow volume, and proportional to the remaining potential volume of sediment to be eroded. The erosion volume development process was well described by an exponential function model, and the physical meanings of the parameters in the model and their empirical values were clarified. Moreover, the distribution of the erosion volume along the flume was shown to satisfy the Weibull distribution, and the distribution parameters were related to the removed height, erosion volume, and sediment volume fraction of the debris flow. We anticipate that our results will serve as a starting point for the demolition and reconstruction of debris flow hazard mitigation engineering in mountainous areas.
1 March 2025 in International Soil and Water Conservation Research
1 October 2023 in Journal of Mountain Science
20 July 2024 in Water Resources Research
Lateral erosion is a critical factor that influences the formation and amplification of debris flows. However, our understanding of the bank retreat process in debris flow channels is limited, which limits the evaluation of debris flow magnitudes and the prediction of their activity trends. Herein, we conduct physical experiments to investigate bank retreat mechanisms using five types of bank soil and multiple debris flow surges. The bank retreat process is categorized into two stages: toe cutting and bank collapse. Toe cutting is mainly caused by hydraulic erosion, bank collapse includes gravity erosion in the form of toppling failure. Notably, the bank retreat process exhibits a significant negative feedback loop. Bank erosion widens the channel bed, subsequently decreasing the flow depth. In turn, this reduction in flow depth mitigates bank erosion. Moreover, we discover a concise pattern in the complex coupling of hydraulic erosion and toppling failure: erosion efficiency is linearly and negatively correlated with the bed widening width. We develop a new parameterized model for describing the bank retreat process and provided empirical values for the model parameters. Furthermore, we observe that the initial erosion efficiency first increases and then decreases with an increase in the fine particle content of the bank soil. Additionally, we report a negative correlation between the maximum bed widening width and the fine particle content in the bank soil that follows a power function relationship.
23 April 2025 in Journal of Mountain Science