1 January 2014 in Electrochimica Acta
21 May 2014 in ACS Applied Materials & Interfaces
29 October 2009 in Nanotechnology
The formation processes of barrier anodic alumina (BAA) and porous anodic alumina (PAA) are discussed in detail. The anodizing current J(T) within the oxide includes ionic current j(ion) and electronic current j(e) during the anodizing process. The j(ion) is used to form an oxide and the j(e) is used to give rise to oxygen gas or sparking. The j(e) results from the impurity centers within the oxide. For a given electrolyte, the j(e) is dependent on the impurity centers and independent of the J(T). The formation of nanopores can be ascribed to the oxygen evolution within the oxide. Oxygen gas will begin to be released at the critical thickness d(c). The manner of the development of PAA is in accordance with that of BAA. The differences between PAA and BAA are the magnitude of j(e) or the continuity of oxygen evolution. There are two competitive reactions, i.e. oxide growth (2Al3 + 3O2- --> Al2O3) and oxygen evolution (2O2- --> O2 up arrow + 4e). The former keeps the wall of the channel lengthened, the latter keeps the channel open. By controlling the release rate of oxygen gas under different pressures, the shape of the channels can be adjusted. The present results may open up some opportunities for fabricating special templates.
18 October 2013 in Nanotechnology
One-dimensional anodic titanium oxide (ATO) nanotube arrays hold great potential as electrode materials for high-performance electrochemical supercapacitors. However, their poor electronic conductivity limits their practical applications. Here, we develop a hydrogen (H2) plasma treatment method to greatly improve the electrochemical performance of ATO electrodes. Compared with pristine ATO, the nanotubes treated by H2 plasma illumination (ATO-H) present a rough and amorphous layer at the surface of the nanotubes with simultaneously incorporated Ti(3+) and -OH groups. At a current density of 0.05 mA cm(-2) in charge-discharge measurements, the specific capacitance of the ATO-H electrode has substantially increased ~7.4 times, with a value as high as 7.22 mF cm(-2). Moreover, the novel ATO-H electrode has also exhibited excellent rate capability (6.37 mF cm(-2) at a current density of 2 mA cm(-2)) and cycling performance with no degradation after 10,000 cycles.
18 September 2013 in Discover Nano
One-dimensional anodic titanium oxide (ATO) nanotube arrays hold great potential as photoanode for photoelectrochemical (PEC) water splitting. In this work, we report a facile and eco-friendly electrochemical hydrogenation method to modify the electronic and PEC properties of ATO nanotube films. The hydrogenated ATO (ATO-H) electrodes present a significantly improved photocurrent of 0.65 mA/cm2 in comparison with that of pristine ATO nanotubes (0.29 mA/cm2) recorded under air mass 1.5 global illumination. The incident photon-to-current efficiency measurement suggests that the enhanced photocurrent of ATO-H nanotubes is mainly ascribed to the improved photoactivity in the UV region. We propose that the electrochemical hydrogenation induced surface oxygen vacancies contribute to the substantially enhanced electrical conductivity and photoactivity.
18 February 2008 in Monatshefte für Chemie - Chemical Monthly