From the perspective of resource renewability and environmental sustainability, hydrogel electrolytes based on naturally abundant cellulose are ideal materials for constructing flexible solid-state zinc-ion hybrid supercapacitors (ZHSCs) and novel electrochemical energy storage (EES) devices. However, the cellulose hydrogel electrolyte, which cannot possess high ionic conductivity and mechanical strength simultaneously, hinders the further application of this electrolyte in the field of ZHSCs. In this study, a high-performance cellulose hydrogel electrolyte was prepared by introducing bentonite (BT) nanoplatelets. The lamellar structure of BT nanoplatelets and coordination interaction between BT and cellulose were utilised to achieve a high ionic conductivity of 46.3 mS cm−1 at 25 °C and compressive strength of 2.93 MPa for the cellulose/BT-ZnSO4 hydrogel (CBH-Zn). The flexible solid-state ZHSC (CBH-ZHSC) possessed a maximum energy density of 97.4 W h kg−1 at a power density of 400 W kg−1 and capacity retention as high as 94% after 45 000 cycles at a current density of 10.0 A g−1. Furthermore, the integrated system consisting of the CBH-ZHSC and solar cells successfully achieved energy conversion, storage, and utilisation. This strategy provides new insights into the application of cellulose hydrogel electrolytes in the field of flexible EES devices.
Structural materials represent the future development direction for electromagnetic interference (EMI) shielding materials, enabling the effective integration of multiple functions into a single material. Nonetheless, the traditional assembly processes remain a significant challenge in coordinating the mechanical properties and functionality of structural materials. In this study, we introduce a biological synthesis method for fabricating multilayered electromagnetic interference (EMI) shielding materials using bacterial cellulose (BC), which are developed by entangling AgNWs, CNT, and Fe3O4 with continuously secreted cellulose nanofibers during in situ fermentation. The BC/AgNWs and BC/CNT/Fe3O4 composites could function as the reflection and absorption layers for electromagnetic waves, respectively, thereby simultaneously achieving superior mechanical performance and electromagnetic wave absorption capabilities. Benefiting from the biosynthesis strategy, the tensile strength of the BC/AgNWs/CNT/Fe3O4 multilayer film reached 327 MPa, which is higher than that of almost all previously reported multilayer electromagnetic shielding materials. Meanwhile, multilayer structural design improves impedance matching, contributing to the high EMI shielding performance (69.2 dB) and high absorption effectiveness ratio (83.1%). This study presents a novel strategy for producing multilayer structural materials through in situ biosynthesis, demonstrating significant utility in the field of stealth technology and electromagnetic interference protection for electronic packaging materials.
In order to facilitate the comprehensive reuse of the filter mud from sugar mills, the experiment of dewatering by expression of the filter mud was performed to investigate its dewatering properties. The results showed that the expression pressure has a significant effect on the dewatering properties. The moisture content of the filter mud decreased significantly as pressure increased in the lower range, and gradually became equilibrium in higher range. During the expression, the moisture contents of the mud decreased dramatically at the beginning, and then approached equilibrium. A simplified model is established for pre-dicting the variation of moisture content of the filter mud with time. The developed model has a good agreement with the experiment data.