16 May 2005 in IEEE Transactions on Nanotechnology
We report on the fabrication and characterization of nanoscale memory elements based on solid electrolytes. When combined with silver, chalcogenide glasses such as Se-rich Ge-Se are good solid electrolytes, exhibiting high Ag ion mobility and availability. By placing an anode that has oxidizable Ag and an inert cathode (e.g., Ni) in contact with a thin layer of such a material, a device is formed that has an intrinsically high resistance, but which can be switched to a low-resistance state at small voltage via reduction of the silver ions. An opposite bias will return the device to a high-resistance state, and this reversible switching effect is the basis of programmable metallization cell technology. In this paper, electron beam lithography was used to make sub-100-nm openings in polymethylmethacrylate layers used as the dielectric between the device electrodes. The solid electrolyte film was formed in these via-holes so that their small diameter defined the active switching area between the electrodes. The Ag-Ge-Se electrolyte was created by the photodiffusion, with or without thermal assistance, of an Ag layer into the Ge-Se base glass. Combined thermal and photodiffusion leads to a nanophase separated material with a dispersed Ag ion-rich material with an average crystallite size of 7.5 nm in a glassy insulating Ge-rich continuous phase. The nanoscale devices write at an applied bias as low as 0.2 V, erase by -0.5 V, and fall from over 10/sup 7/ /spl Omega/ to a low-resistance state (e.g., 10/sup 4/ /spl Omega/ for a 10-/spl mu/A programming current) in less than 100 ns. Cycling appears excellent with projected endurance well beyond 10/sup 11/ cycles.
11 September 2006 in IEEE Transactions on Nanotechnology
We describe the materials aspects and electrical characteristics of W-(Cu/WO3)-Cu switching elements. These materials are compatible with back-end-of-line processing in CMOS integrated circuits where both tungsten and copper already play a significant role. Devices based on Cu/WO3 solid electrolytes formed by photodiffusion of copper into tungsten oxide switch via the electrochemical formation of a conducting filament within the high resistance electrolyte film. They are able to switch reversibly between widely spaced nonvolatile resistance states at low voltage (<1 V) and current (125 degC). This difference in behavior was attributed to the observation that the copper tends to oxidize in the plasma-grown oxide whereas the copper in the deposited oxide exists in an unbound state and is, therefore, more able to participate in the switching process
8 November 1999 in Physical Review Letters
Ternary bulk glasses in the Se-rich region are shown to be intrinsically phase separated into an -rich glass and a residual backbone ( at ) with Ag acting as a network modifier. The existence of an glass with a is explained quantitatively in terms of constraint counting algorithms. In contrast, Ge-rich glasses are homogeneous, wherein Ag acts as a network former, replacing available Ge sites of the backbone to be 3-fold coordinated to Se.
1 April 2002 in Journal of Non-Crystalline Solids
1 May 2006 in Journal of Non-Crystalline Solids
1 September 2003 in Superlattices and Microstructures