16 April 2019 in Experimental Heat Transfer
Performance of multilayer thermal insulators (MLIs) are depends on spacers density and number of reflector layers. In optimum density, aerogel spacer has the lowest thermal conduction. In the other hand, optimum layers density of MLI depend on temperature situation, which the minimum heat flux is flow through the thickness. In this work, aerogel spacer with density of 76 kg/m3 and MLI layer density of 25 layer/cm (number of layers per one centimeter of thickness) were designed as adequate insulators. Therefore, a novel class of MLI system with thermal conductivity of 5.43 × 10−4 W/m.K was evaluated as a high performance thermal insulator.
21 January 2025 in Macromolecular Materials and Engineering
Porous hydrogels, including physical pores and spaces within the polymer network, exhibit rapid water uptake rates. Synthesizing porous hydrogels through nanoemulsion templating represents a promising avenue for the development of advanced materials with tailored properties. Certain attributes, including but not limited to the ability to tune droplet size, volume fraction, and interdroplet interactions, provide tools to precisely manipulate the structure of nanoemulsions. The main research question is how the colloidal structure of the template changes the characteristics of a polymer network. Therefore, this study investigates the preparation of porous hydrogels using concentrated nanoemulsions as templates where modulating interdroplet interactions results in different pore structures and properties of the polymer network. Nanoemulsions are prepared by dispersing oil droplets in a continuous phase containing poly (ethylene glycol)‐diacrylate (PEGDA) and sodium dodecyl sulfate (SDS). Subsequent photo‐polymerization of PEGDA and removal of the oil phase leaves behind a porous polymer structure. Then, Hydrogels are analyzed to study the relationship between netwrok structures and water uptake capacities. The discussion focuses on how droplet arrangement under the influence of altered concentrations of SDS, provides confinement for changing the crosslink density of the polymer network.
26 May 2026 in Soft Matter
An updated Saramito model captures type III elastoviscoplastic rheology from linear to nonlinear regimes with a single set of fitting parameters, using a two-step physics-informed neural network fitting.