14 June 2005 in Applied Physics Letters
We have investigated the thermal stability of nickel monogermanide (NiGe) films formed by rapid thermal annealing on both single- and polycrystalline Ge substrates. We found that the NiGe phase is the only one present after nickel germanidation in the temperature range 400–700°C. A fairly uniform NiGe film formed on the single-crystalline Ge; it possessed excellent resistivity (15.6μΩcm) and was thermally stable up to 550°C, but it degraded rapidly at higher temperatures as a result of agglomeration. In contrast, the NiGe film formed on the polycrystalline Ge exhibited much poorer thermal stability, possibly because of polycrystalline Ge grain growth, which resulted in columnar NiGe grains interlaced with Ge grains that had a dramatically increased sheet resistance. As a result, we observed that the sheet resistances of NiGe lines subjected to annealing at 500°C depended strongly on the linewidth when this width was comparable with the grain size of the polycrystalline Ge.
18 July 2002 in Journal of Applied Physics
1 January 2004 in Journal of the Electrochemical Society
The effects of buffer layers on the crystallization process of strontium bismuth tantalite (SBT) thin films, using a metallorganic decomposition technique, are investigated in this study. Ultrathin tantalum (Ta) buffer layers of various thicknesses were deposited onto <mml:math display="inline"><mml:mi mathvariant="normal">Pt</mml:mi><mml:mo>/</mml:mo><mml:msub><mml:mi mathvariant="normal">TiO</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mo>/</mml:mo><mml:msub><mml:mi mathvariant="normal">SiO</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mo>/</mml:mo><mml:mi mathvariant="normal">Si</mml:mi></mml:math>Pt/TiO2/SiO2/Si substrates using magnetron sputtering. The crystallinity, microstructure, and electrical properties of the resulting SBT films on top of the Ta layer were found to be strongly dependent on the thickness of the buffer layer. By optimizing this buffer layer thickness, a homogeneous bismuth-layered structure with uniformly distributed fine grains, it was clearly evident that the SBT film, annealed at 750°C for 1 min, and the corresponding remanent polarization <mml:math display="inline"><mml:mo stretchy="false">(</mml:mo><mml:mn>2</mml:mn><mml:msub><mml:mi>P</mml:mi><mml:mrow><mml:mi mathvariant="normal">r</mml:mi></mml:mrow></mml:msub><mml:mo stretchy="false">)</mml:mo><mml:mo>,</mml:mo></mml:math>(2Pr), can be as large as 18.8 μC/cm2 at an applied voltage of 5 V. It is suggested that these buffer layers cause the SBT composition to depart from stoichiometry to an enriched Ta condition. During the crystallization procedure in oxygen ambient, the excess Ta atoms in local regions easily reacted with O atoms to form <mml:math display="inline"><mml:msub><mml:mi mathvariant="normal">TaO</mml:mi><mml:mrow><mml:mi>x</mml:mi></mml:mrow></mml:msub></mml:math>TaOx centers. They are believed to serve as the nucleation sites that cause the reduction of the activation energy of SBT crystallization. © 2004 The Electrochemical Society. All rights reserved.
1 January 2004 in Electrochemical and Solid-State Letters
The microstructural feature of platinum (Pt) bottom electrode in a strontium-bismuth-tantalate (SBT)/Pt/titanium (Ti) stack was investigated by field-emission transmission electron microscopy. The appearance of a thin nanocrystalline Pt (nano-Pt) interfacial layer was unexpectedly observed in the SBT/Pt interface region after crystallization treatment. The energy-dispersive spectrometer analyses indicated a great amount of formed along the grain boundaries of this nanocrystalline layer. Such a phenomenon is strongly related to the grain-boundary diffusions of O and Ti atoms during the annealing process in oxygen ambient. It is speculated that the structural reconstruction of the Pt electrode was likely triggered by the compressive stress due to the large volume expansion during growth. Under such compressive stress and thermal conditions, Pt may be plastically deformed and inclined to recover and recrystallize into the nanocrystalline structure. Because the emergence of in nano-Pt/columnar-Pt interfacial regions would significantly deteriorate the continuity and the ductility of Pt electrode, it possibly causes the peeling of SBT layer and poses a serious problem to the integration of the ferroelectric capacitors. © 2004 The Electrochemical Society. All rights reserved.