22 February 2021 in Eastern-European Journal of Enterprise Technologies
This paper proposes a method to experimentally study the stressed state of the metallic structure of an overhead crane when using running wheels of different designs. The study employed a functioning electric, supporting, double-girder overhead crane with a capacity of 5 tons and a run of 22.5 m. Strain gauges assembled in a semi-bridge circuit and connected to the analog-digital converter Zetlab210 (Russia) were used to determine the girder deformations at the time of hoisting and moving cargoes of different masses. The cargo was lifted and displaced under the same conditions, on the regular wheels of a cargo trolley and the wheels with an elastic rubber insert. The girder deformation diagrams were constructed. The subsequent recalculation produced the stressed state's dependences at each point of cargo movement when using both regular wheels and the wheels with an elastic rubber insert. Also established were the dependences and the duration of oscillations that occur over the cycle of cargo lifting and moving. The experimental study cycle included cargo lifting in the far-left position by a trolley, moving the cargo to the far-right position, and returning the trolley with the cargo to its original position. It should be noted that the application of a new, modernized design of the running wheels of a cargo trolley with an elastic rubber insert effectively dampen the oscillations in the metallic structure of the crane. The experimental study's results helped establish an 18 % reduction in stresses in the girder of the overhead crane, as well as a decrease in peak vibrations, by 20 seconds, at the same cycles of cargo hoisting and moving. In addition, using wheels with an elastic rubber insert reduces the period of oscillation damping at the end of the cycle of cargo movement, by at least 30 %.
30 September 2020 in EUREKA: Physics and Engineering
The aim of research is to substantiate the rational design of the travel wheel based on the determination of the dynamic forces arising from the movement of the freight carriage and the crane bridge. The research methodology is based on analytical methods for studying dynamic forces in the mechanism of movement of the cargo carriage of an overhead crane. The obtained solution of the three-mass dynamic scheme of the movement of the freight carriage. To verify the theoretical data obtained, an experiment was carried out on an overhead crane with a lifting capacity of 5 , span of 22.5 m, lifting height of 8 m, operating mode of 7 K. The study of the vibration state was carried out on the crane beam in the middle of the span, on the axis of the driven wheel of the crane trolley with an elastic insert and on the axis of the drive wheel of the crane trolley of a conventional design. Crane wheels are the fastest wearing parts of a crane. A decrease in their durability leads to an increase in repair costs and crane downtime. Therefore, increasing the durability of crane travel wheels is an urgent task of modern crane construction. All designs of travel wheels are quite rigid and do not perceive shocks and distortions arising from the deviation of the rail track from the recommended values and lead to significant wear of the flanges and rails. The analysis of the obtained solutions showed that when using a travel wheel with an elastic insert, the dynamic factors during the movement of the freight carriage decrease. Dependences are obtained for determining the dynamic forces arising from the movement of the travel crane wheel, taking into account the rigidity of the elastic ring, which is installed in the travel wheel. The analysis of the regularities of the formation of vibration signs at different points of the overhead crane structure is carried out. The proposed design and calculation method for a travel wheel with an elastic insert improves its operational reliability
28 February 2021 in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
KUKharkiv National Automobile and Highway University
Kharkiv National Automobile and Highway University
NUNational University of Civil Defence of Ukraine
National University of Civil Defence of Ukraine
NINational Technical University "Kharkiv Polytechnic Institute"
National Technical University "Kharkiv Polytechnic Institute"
+1