8 May 2012 in Environmental Science and Pollution Research
1 October 2015 in Journal of the Taiwan Institute of Chemical Engineers
1 July 2014 in Journal of Industrial and Engineering Chemistry
10 August 2016 in Radiochimica Acta
The radioactive wastes from different activities have to be safely disposed of and isolated from the human environment. The retardation of radioactive materials by designed barriers is originally controlled by the sorption ability of the mineral compositions. In this work, a naturally available mineral composite, a hydroxyl magnesium silicate (HMS) was investigated as potential natural inorganic sorbent for the retention of long-lived radionuclides (134Cs, 60Co and 152+154Eu) from aqueous solutions. The factors affecting the sorption process, such as contact time and pH were evaluated. Furthermore X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), differential thermal and thermogravimetry analyses (DTA/TGA) measurements were examined in order to assess the physicochemical properties of the magnesium silicate mineral. Langmuir and Freundlich isotherms fitted the result s substantially better than the Flory–Huggins isotherm and the sorption was found to follow pseudo-first order kinetic model. The proposed mineral has been successfully applied for the sorption of 134Cs, 60Co and 152+154Eu radionuclides from real radioactive waste. The results indicated that about 97.4–99% of 134Cs, 60Co and 152+154Eu radionuclides were efficiently retained onto the HMS mineral. Based on the results obtained, it can be concluded that the HMS mineral is an economic and efficient retaining material for environmental hazardous migration and/or leakage of some radionuclides such as 134Cs, 60Co and 152+154Eu and trivalent actinide (241Am, 242mAm and 243Am) ions. Therefore, this study could be used as a starting point to establish and consider that mineral as an engineered barrier around the disposal facilities at the nuclear activity centres.
1 September 2017 in Journal of Molecular Liquids
22 January 2016 in Radiochimica Acta
Radionuclides should be separated from the waste streams before their discharge due to their undesired effects on human physiology and ecological systems. In this work, the feasibility of using Dowex-HCR-S/S(HCR), a strong acid cation-exchange resin as sorbent for 134Cs and 152+154Eu ions removal was examined. Sorption experimental data were analyzed by kinetic and isotherm models. The distribution coefficients of 134Cs and 152+154Eu were studied as a function of pH; 3525.6 mL/g and 393.1 mL/g were obtained in case of 152+154Eu and 134Cs at pH 4.1, respectively. Four isotherm models; Freundlich, Langmuir, Tempkin and Dubinin-Radushkevich, were used to fit the sorption equilibrium data. The results indicated that the sorption of both 134Cs and 152+154Eu onto HCR resin is highly fit with the pseudo-second order model. The sorption kinetic for 134Cs and 152+154Eu onto polymeric resin takes 90 and 120 min to reach equilibrium which is considered as a fast kinetic process. The results of sorption experiments indicate that the maximum sorption capacity of 134Cs and 152+154Eu are 102.84 and 161.93 mg/g. The amount of radionuclides removed increased with increasing temperature, which indicates the endothermic nature of the sorption process. The negative values of ΔG ○ indicated the spontaneity of the sorption process. The proposed procedure has been successfully applied for the removal of 134Cs, 152+154Eu and other radionuclides from real liquid radioactive waste. The present study concludes that the commercial HCR resin used under these conditions, has a considerable potential as an effective sorbent for the removal of 134Cs and 152+154Eu from real radioactive wastewater. It can therefore have a place in the treatment of cationic radionuclides from radioactive wastewater since it is of a low-cost and commercially available adsorbent.