20 May 2019 in Scientific Reports
Plastic deformation of polycrystalline materials under shock wave loading is a critical characteristic in material science and engineering. However, owing to the nanosecond time scale of the shock-induced deformation process, we currently have a poor mechanistic understanding of the structural changes from atomic scale to mesoscale. Here, we observed the dynamic grain refinement of polycrystalline aluminum foil under laser-driven shock wave loading using time-resolved X-ray diffraction. Diffraction spots on the Debye-Scherrer ring from micrometer-sized aluminum grains appeared and disappeared irregularly, and were shifted and broadened as a result of laser-induced shock wave loading. Behind the front of shock wave, large grains in aluminum foil were deformed, and subsequently exhibited grain rotation and a reduction in size. The width distribution of the diffraction spots broadened because of shock-induced grain refinement and microstrain in each grain. We performed quantitative analysis of the inhomogeneous lattice strain and grain size in the shocked polycrysalline aluminum using the Williamson-Hall method and determined the dislocation density under shock wave loading.
27 January 2020 in Journal of Synchrotron Radiation
3 May 2022 in Physics and Chemistry of Minerals
7 June 2021 in Applied Physics Letters
Establishing a mechanistic understanding of dynamic fracture is critical for the design of efficient and safe structural materials. Transformation toughening describes the process by which a crystal structure change can reduce the crack-driving force. The understanding of the dynamic behavior of transformation-toughened materials is limited. To clarify the relationship between crystal structure transformations and toughening during a dynamic loading, we carried out a time-resolved x-ray diffraction study of yttria-stabilized tetragonal zirconia polycrystal under shock loading. The results show that the ambient tetragonal crystal structure is maintained on loading and phase transformation to the monoclinic phase occurs only after the onset of dynamic fracture, indicating that the transformation toughening is associated with dynamic fracture caused by wave interactions. This study not only revealed the reason for the high spall strength of zirconia ceramics but also demonstrated the great potential for time-resolved x-ray diffraction method to study fracture dynamics.
1 January 2020 in Journal of Mineralogical and Petrological Sciences
We investigated the structure changes and phase transformation from nanocrystalline mackinawite to pyrite using hydrothermal experiments, synchrotron X–ray diffraction (XRD) technique, atomic Pair Distribution Function (PDF) method, Extended X–ray Absorption Fine Structure (EXAFS) analysis, and transmission electron microscopic (TEM) observation. The first hydrothermal ageing experiment was performed by heating the nanocrystalline mackinawite at 120 °C for 12 h. The nanocrystalline mackinawite remained essentially unchanged for 12 h. The d001 and FWHM values of XRD peaks decreased for the first 2 h and subsequently maintained almost constant. There was no linear relationship between lattice parameters and hydrothermal heating time. The crystallite size quickly increased by the heating of 2 h, leading to the increase of crystallinity and appearance of the medium–range order in the nanocrystalline mackinawite. The nanocrystalline mackinawite preferentially grew in the horizontal direction along the sheet structure. The Fe atoms were distributed in the tetrahedral sites with a site occupancy of approximately 80%. The pre–edge peak energy of Fe K–edge suggested that about 10% Fe3+ was included in the nanocrystalline mackinawite to compensate the charge deficiency of Fe2+. The second hydrothermal ageing experiment was performed by heating the nanocrystalline mackinawite at 120 °C under the presence of elemental sulfur for 24 h. The nanocrystalline mackinawite persisted up to 8 h of heating time. Thereafter, pyrite and greigite instead of the nanocrystalline mackinawite appeared. Finally pyrite became dominant. The d001 and lattice parameters of nanocrystalline mackinawite varied significantly compared with those heated under the absence of elemental sulfur. The pre–edge peak energy indicated that the Fe2+ was oxidized to Fe3+ by elemental sulfur acting as the oxidant during the phase transformation from nanocrystalline mackinawite to greigite. In the phase transformation to pyrite, on the other hand, the Fe3+ was reduced to Fe2+ by sulfur in mackinawite and greigite acting as the reductant. The EXAFS analysis revealed that the second peak from the Fe–Fe interaction appeared at the heating time of 2 h, implying the formation of sheet structure consisting of edge–sharing FeS4 tetrahedra. Intensity of the second shell peak from the Fe–Fe interaction reduced after the heating time of 8 h. Instead, new peaks corresponding to the Fe–S and Fe–Fe interaction appeared after the heating time of 12 h. This result was strongly associated with formation of the disulfide bonds (S–S bonds) in pyrite. Consequently, the elemental sulfur can be recognized as one of the most important factors to promote the phase transformation from mackinawite to pyrite in the reducing lake and marine sediments.
31 August 2020 in Geophysical Research Letters
Baddeleyite (ZrO2) is used to infer shock pressures and understand the impact history of planetary bodies. Although the high‐pressure phase transition behavior of baddeleyite has been intensively investigated under hydrostatic conditions, there is little information on the dynamic response of phase transitions under shock‐loading conditions. We performed in situ X‐ray diffraction measurements on shock‐loaded baddeleyite using a synchrotron X‐ray pulse at beamline NW14A of the Photon Factory Advanced Ring, High Energy Accelerator Research Organization (KEK), Japan. A phase transition from monoclinic to orthorhombic‐I ZrO2 occurs at 3.3 GPa during shock compression and immediately returns to the monoclinic phase during subsequent release. Orthorhombic‐II ZrO2 is not observed up to 15 GPa. This study refines the phase transition behavior of baddeleyite under shock conditions up to 15 GPa, and the phase transition boundary is determined from direct observations. These findings improve the understanding of the shock history of planetary bodies.