Instituto de Investigaciones Cientficas y Tecnolgicas en Electrnica (ICYTE), Facultad de Ingeniera, Universidad Nacional de Mar del Plata (UNMDP), Mar del Plata, Argentina
Auto-generated profile, based on publicly available information
Jonatan Roberto Fischer
Instituto de Investigaciones Cientficas y Tecnolgicas en Electrnica (ICYTE), Facultad de Ingeniera, Universidad Nacional de Mar del Plata (UNMDP), Mar del Plata, Argentina
In this paper, an inverter-side current (ISC) control strategy for grid-connected voltage source inverter with LCL filters is proposed based on a generalized predictive control (GPC) formulation as it has the advantages of fixed switching frequency, a systematic design procedure and low computational complexity. As the GPC strategy is a subtype of continuous-control-set model predictive control strategies, a proper model for controlling the ISC is obtained, showing that a full-order model is preferred to its first-order counterpart. The controller is designed taking into consideration harmonic distortion limits and robustness against filter component variations. To this end, a complete three-wire LCL filter model is obtained and impedance sensitivity to each component variation is analyzed. Finally, its performance is evaluated by means of experimental results and compared with a predictive deadbeat controller.
15 March 2022 in IEEE Transactions on Industrial Electronics
Three-level boost dc–dc converters present several advantages in comparison with conventional boost converters, such as reduced switching losses, lower voltage ratings for the diodes and switches, and smaller size of reactive components. The topology requires three voltage levels at the output, therefore, replacing the output capacitor of the traditional boost converter with two capacitors and a midpoint. However, due to component tolerances and/or current flowing through the midpoint, output capacitors voltages become unbalanced, leading to converter malfunctioning or destruction. To overcome this issue, an exact feedback linearization control strategy is proposed, for which an implementation with minimum sensors is obtained. Analyses of its performance at different input voltages and of its robustness against component variations are included. Simulation results are provided, showing a comparison of the proposal with a conventional control strategy and its steady-state performance with nonlinear loads. The proposed control strategy was implemented in a low-cost microcontroller unit and, experimental verification is included.