22 July 2006 in Journal of Nanoparticle Research
CMChristopher B. Montgomery
Christopher B. Montgomery
19 July 2009 in Annual Review of Analytical Chemistry
Complex analytical problems, such as detecting trace quantities of hazardous chemicals in challenging environments, require solutions that most effectively extract relevant information about a sample's composition. This review presents a chemiresistive microarray–based approach to identifying targets that combines temperature-programmed elements capable of rapidly generating analytically rich data sets with statistical pattern recognition algorithms for extracting multivariate chemical fingerprints. We describe the chemical-microsensor platform and discuss its ability to generate orthogonal data through materials selection and temperature programming. Visual inspection of data sets reveals device selectivity, but statistical analyses are required to perform more complex identification tasks. Finally, we discuss recent advances in both devices and algorithms necessary to deal with practical issues involved in long-term deployment. These issues include identification and correction of signal drift, challenges surrounding real-time unsupervised operation, repeatable device manufacturability, and hierarchical classification schemes designed to deduce the chemical composition of untrained analyte species.
2 June 2011 in Sensors and Actuators B: Chemical
1 December 2003 in Sensor Letters
17 February 2010 in Journal of Microelectromechanical Systems
A major goal of materials research over the past two decades has been the development of high-throughput methods for rapid discovery and optimization of processing routes. These methods rely on highly parallel materials synthesis to efficiently create libraries wherein at least one processing parameter has been systematically varied. Here, we demonstrate a method of using an array of microelectromechanical-systems (MEMS)-based microhotplates in the high-throughput optimization of a chemical vapor deposition (CVD) process. Electrical and thermal processing variables are independently controlled at each element of the array, both during and after deposition. In the experiment described, SnO2 films were deposited on the microhotplates at 375°C or 500°C, with pulsed or continuous heating, and with voltage applied or not applied to the films. A 16-element microhotplate array was used, thus allowing a repeated two-level full factorial exploration of the experimental space. After deposition, sputter depth profile via X-ray photoelectron spectroscopy was used to determine the deposition rate of the films. Statistical modeling then determined the main effects and interaction effects of the growth conditions. Although applied here to the growth rate during CVD, the technology described is generally applicable for high-throughput study of the effects of thermal and electrical processing steps in thin-film manufacture.
26 October 2011 in IEEE Sensors Journal
When producing chemical sensors, especially in thin film form, there are often a large variety of processing variables that are believed to impact the ultimate performance of the materials. It is thus advantageous to find methods for simultaneous, high-throughput characterization of many process variables. Here, we report on a method for using MEMS-based microhotplates to create and characterize arrays of chemiresistive SnO thin films. The microhotplates are used both to control the thermal process variables at each element of the array during film growth by CVD as well as subsequently to operate the sensors. Example chemiresistive properties of the films at 200°C were characterized during exposure to CH OH and NO . Through the use of a fractional factorial experiment design, the effects of 4 different process variables (growth temperature, thickness, presence of a dopant and use of rapidly pulsed heating during growth) were reliably determined using only 8 films and the associated statistical modeling of the results .