Studying the aero-optical effects induced by turbulent structures with different scales helps determine the capture scale of turbulent structures in experiments/calculations and improve the turbulence breakup device. In this paper, the density field of a supersonic turbulent boundary layer at was measured based on the nano-tracer plane laser scattering technique. Two-dimensional orthogonal wavelet multi-resolution analysis was applied to obtain information about different flow scales. The ray-tracing method simulates the propagation of a Gaussian plane beam through the nonuniform flow field at different resolutions. The results show that the turbulent boundary layer thickness and its calculation method lead to the difference in scaling calculation results among the existing experiments. The turbulent structures about contribute most to aero-optical effects. With the reduction of the resolution, the contribution of small turbulent structures to aero-optical effects reduces obviously. When the minimum scale of turbulent structures captured is larger than , the resolution can no longer reflect the real aero-optics results of turbulent structures. The smallest optically active scale predicted is in Mani’s theory. The turbulent structures smaller than have little effect on optical path difference (OPD), and the higher-order quantities change significantly around . According to experimental results, it is promising to improve the aero-optical suppression effects by breaking the large eddy into the turbulent structures smaller than , or even .
Despite the fact that a supersonic cooling gas film can efficiently insulate aerodynamic heating, its interaction with the mainstream generates a sophisticated flow structure which may cause significant aero-optical ramifications. This study aims to analyze the fluid structure and wavefront distortion of supersonic gas film when subjected to varying nozzle pressure ratios (NPR) by employing two distinct cooling refrigerants, namely CO2 and air. Within the NPR range of 0 to 2, a linear relationship exists between the wavefront distortion of both CO2 and air films, while the CO2 film exhibits higher wavefront distortion than the air. Additionally, the influence of condensation on the discrepancies in aero-optical effects of the two refrigerants is discussed.
23 September 2025 in Chinese Journal of Aeronautics
A hypervelocity imperfect gas nozzle with a shared wave-elimination contour is designed by the residual correction method, allowing the test Mach number to be varied by changing the throat contours. Owing to imperfect gas effects, the nozzle designed by the classical method of characteristics with boundary layer correction does not produce a uniform flow field, resulting in significant deviation from the target Mach number. In this work, the computational fluid dynamics solver is used as an independent module without being coupled to the optimization code, reducing the design complexity. Designers can choose the appropriate solver according to the specified physical characteristics to consider imperfect gas effects. The Mach 15 hypervelocity nozzle designed by the residual correction method better eliminates the Mach waves and achieves a much higher flow uniformity than the nozzle designed by the classical method. On this basis, the dependence domain of the shared wave-elimination contour and the influence domain of the transonic solution are solved by the method of characteristics, and a replaceable throat contour is rigorously designed from aerodynamics theory. Quantitative evaluations show that the nozzles with a shared wave-elimination contour have the same level of flow uniformity, achieving high flow quality at Mach 13–15. The evaluation results validate the design's feasibility, supporting the future construction of hypervelocity tunnels.