9 May 2022 in Applied Physics Letters
Miniaturization is a trend of development toward practical applications for diamond nitrogen-vacancy centers-based sensors. We demonstrate a compact diamond magnetic field sensor device using a standard microfabrication process. A single-crystal-diamond plate is embedded in a cavity formed with stacking of three silicon chips. Thermal compression bonding is implemented at silicon–silicon and diamond–silicon interfaces ensuring mechanical robustness. The specific construction volume for the essential sensor component is about 10 × 10 × 1.5 mm3. By integrating a gradient index lens pigtailed fiber to the sensor device, 532-nm laser light and emitted fluorescence share a common path for excitation and detection. An omega-shaped transmission line for applied microwave power is fabricated directly on the surface of diamond. The integrated sensor device exhibits an optimized sensitivity of 2.03 nT·Hz−1/2 and over twofold enhancement of fluorescence collection efficiency compared to bare diamond. Such a sensor is utilized to measure a magnetic field change caused by switching a household electrical appliance.
1 January 2023 in Review of Scientific Instruments
We present a new magnetometry method integrating an ensemble of nitrogen-vacancy (NV) centers in a single-crystal diamond with an extended dynamic range for monitoring a fast changing magnetic-field. The NV-center spin resonance frequency is tracked using a closed-loop frequency locked technique with fast frequency hopping to achieve a 10 kHz measurement bandwidth, thus allowing for the detection of fast changing magnetic signals up to 0.723 T/s. This technique exhibits an extended dynamic range subjected to the working bandwidth of the microwave source. This extended dynamic range can reach up to 4.3 mT, which is 86 times broader than the intrinsic dynamic range. The essential components for NV spin control and signal processing, such as signal generation, microwave frequency control, data processing, and readout, are integrated in a board-level system. With this platform, we demonstrate a broadband magnetometry with an optimized sensitivity of 4.2 nT Hz−1/2. This magnetometry method has the potential to be implemented in a multichannel frequency locked vector magnetometer suitable for a wide range of practical applications, such as magnetocardiography and high-precision current sensors.