21 October 2021 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Spasticity is a common disabling complication caused by the upper motor neurons dysfunction following neurological diseases such as stroke. Currently, the assessment of the spastic hypertonia triggered by stretch reflexes is manually performed by clinicians using perception-based clinical scales, however, their reliability is still questionable due to the inter-rater and intra-rater variability. In order to objectively quantify the complex spasticity phenomenon in post-stroke patients, this study proposed a multi-layer assessment system based on a novel measurement device. The exoskeletal device was developed to synchronously record the kinematic, biomechanical and electrophysiological information in sixteen spastic patients and ten age-matched healthy subjects, while the spastic limb was stretched at low, moderate and high velocities. The mechanical impedance of the elbow joint was identified using a modified genetic algorithm to quantify the alterations in viscoelastic properties underlying pathological resistance. Simultaneously, the time-frequency features were extracted from the surface electromyography (sEMG) signals to reveal the neurophysiological mechanisms of the spastic muscles. By concatenating these single-layer decisions, a support vector regression (SVR)-based fusion model was developed to generate a more comprehensive quantification of spasticity severity. Experimental results demonstrated that the stiffness and damping components of the spastic arm significantly deviated from the nonspastic baseline, and strong correlations were observed between the proposed spasticity assessment and the severity level measured by clinical scales ( ${R = {0.86},\;{P} = {1.67}{e} - {5}}$ ), as well as the tonic stretch reflex threshold (TSRT) value ( ${R = - {0.89},\;{P} = {3.54}{e} - {6}}$ ). These promising results suggest that the proposed assessment system holds great potential to support the clinical diagnosis of motor abnormalities in spastic patients, and ultimately enables optimal adjustment of treatment protocols.
19 July 2024 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Motor imagery (MI) based brain computer interface (BCI) has been extensively studied to improve motor recovery for stroke patients by inducing neuroplasticity. However, due to the lower spatial resolution and signal-to-noise ratio (SNR) of electroencephalograph (EEG), MI based BCI system that involves decoding hand movements within the same limb remains lower classification accuracy and poorer practicality. To overcome the limitations, an adaptive hybrid BCI system combining MI and steady-state visually evoked potential (SSVEP) is developed to improve decoding accuracy while enhancing neural engagement. On the one hand, the SSVEP evoked by visual stimuli based on action-state flickering coding approach significantly improves the recognition accuracy compared to the pure MI based BCI. On the other hand, to reduce the impact of SSVEP on MI due to the dual-task interference effect, the event-related desynchronization (ERD) based neural engagement is monitored and employed for feedback in real-time to ensure the effective execution of MI tasks. Eight healthy subjects and six post-stroke patients were recruited to verify the effectiveness of the system. The results showed that the four-class gesture recognition accuracies of healthy individuals and patients could be improved to 94.37 ± 4.77% and 79.38 ± 6.26%, respectively. Moreover, the designed hybrid BCI could maintain the same degree of neural engagement as observed when subjects solely performed MI tasks. These phenomena demonstrated the interactivity and clinical utility of the developed system for the rehabilitation of hand function in stroke patients.
26 August 2022 in IEEE Transactions on Robotics
Physical human–robot interaction performance of present rehabilitation robots are still not satisfactory in the clinical practice. Especially, the work space where the robot can be driven smoothly by users is still very limited, which prevents rehabilitation robots from being applied successfully. In this study, a new concept of drivable space is proposed to evaluate the work spaces of rehabilitation robots, and a method for expanding the drivable space is designed based on the dynamics of the coupled human–robot system and human joint characteristics. First, the definition of drivable space is presented based on comparison of human joint torques, and the minimal torques necessary to drive robot joints, which is mainly determined by the torque estimation errors for general rehabilitation robots driven smoothly by motors. Therefore, a method for improving torque estimation accuracies based on dynamics modeling is then designed. A data-driven error prediction method based on Gaussian process regression is proposed to adaptively compensate the model errors, by which the most accurate dynamic model so far for the coupled system can be obtained, and a method for generation of the training dataset, which is used in error prediction, is designed as well. Moreover, the torque–angle relationship of human joints is modeled and used to optimize the torque error distribution, by which it can be proven that the drivable space can be further expanded. Finally, performance of the proposed methods are demonstrated and validated by experiments carried out on a lower limb rehabilitation robot.
29 November 2023 in IEEE Transactions on Medical Robotics and Bionics
Cyclograms are useful for describing interjoint coordination in clinical gait analyses. In this paper, we establish a model for generating hip-knee cyclograms at different walking speeds by using B-Spline curves, which could provide reference standards for evaluating hip-knee joint coordination. We use the shape similarity between individual and reference cyclograms to develop a hip-knee joint coordination assessment metric: the dynamic time warping-shape context (DTW-SC). The DTW algorithm is used to match corresponding points between the hip-knee cyclograms, and the matched results are visualized to show abnormal changes in gait patterns. The distance between corresponding points is determined through shape context descriptors and applied to quantify the hip-knee joint coordination of the subjects. To verify the effectiveness of the proposed approach, a stereo vision-based portable lower limb motion capture system is developed to collect hip and knee joint angle data from five healthy and five hemiplegic subjects walking at comfortable speeds. Experimental results show that the range of the modeling error is 0.84∘, 2.76∘. DTW-SC metric can visualize and quantify the abnormal patterns of the subject’s hip-knee joint coordination. The work is meaningful in evaluating the hip-knee joint coordination of hemiplegic patients.
21 February 2025 in Machine Intelligence Research