11 March 2022 in Science Advances
The development of real-time and sensitive humidity sensors is in great demand from smart home automation and modern public health. We hereby proposed an ultrafast and full-color colorimetric humidity sensor that consists of chitosan hydrogel sandwiched by a disordered metal nanoparticle layer and reflecting substrate. This hydrogel-based resonator changes its resonant frequency to external humidity conditions because the chitosan hydrogels are swollen under wet state and contracted under dry state. The response time of the sensor is ~10 4 faster than that of the conventional Fabry-Pérot design. The origins of fast gas permeation are membrane pores created by gaps between the metal nanoparticles. Such instantaneous and tunable response of a new hydrogel resonator is then exploited for colorimetric sensors, anti-counterfeiting applications, and high-resolution displays.
14 November 2022 in Advanced Science
Humidity‐responsive structural coloration is actively investigated to realize real‐time humidity sensors for applications in smart farming, food storage, and healthcare management. Here, humidity‐tunable nano pixels are investigated with a 700 nm resolution that demonstrates full standard RGB (sRGB) gamut coverage with a millisecond‐response time. The color pixels are designed as Fabry–Pérot (F–P) etalons which consist of an aluminum mirror substrate, humidity‐responsive polyvinyl alcohol (PVA) spacer, and a top layer of disordered silver nanoparticles (NPs). The measured volume change of the PVA reaches up to 62.5% when the relative humidity (RH) is manipulated from 20 to 90%. The disordered silver NP layer permits the penetration of water molecules into the PVA layer, enhancing the speed of absorption and swelling down to the millisecond level. Based on the real‐time response of the hydrogel‐based F–P etalons with a high‐throughput 3D nanoimprint technique, a high‐resolution multicolored color print that can have potential applications in display technologies and optical encryption, is demonstrated.
9 December 2022 in iScience
The increasing advances in thermal radiation regulators have attracted growing interest, particularly in infrared sources, thermal management, and camouflage. Despite many advances in dynamic thermal emitters with great controllability, sustained external energy is required to maintain the desired emission. In this study, we present a polarization-driven thermal emission regulator based on a two-way control: i) phase change and ii) polarization tuning. Based on a conventional, non-volatile phase change material, i.e., Ge2Sb2Te5 (GST), we newly introduce an anisotropic medium for facile emissivity regulation without heat energy consumption. A rigorous coupled-wave analysis method provides design guidelines for finding optimal structural parameters. We utilized a simple glancing angle deposition process which induces tilted self-aligned nanocolumns with anisotropic properties. The fabricated sample shows polarization-sensitive thermal regulation through thermal imaging spectroscopic measurement. Additionally, we manufactured a multispectral visibly/thermally camouflaged patch that identifies encrypted information at a specific polarization state for a proof-of-concept demonstration.
2 October 2019 in Optical Materials Express
Bioinspired moth-eye surface provides broadband antireflection features, which significantly enhance performances in optical components/devices. However, their practical uses are strictly limited due to poor mechanical stability of nano-patterns. In this study, we artificially engineered moth-eye structures on polycarbonate substrate through a thin-film coating of mechanically stable dielectric materials (i.e., Al2O3, Cr2O3, ZrO2, and TiO2 etc). The geometry of Al2O3-coated moth-eye surface is designed by considering the effective medium theory and confirmed by calculation of diffraction efficiency based on a rigorous coupled-wave analysis method. The tailored Al2O3-coating on moth eye surface exhibit the improved hardness while maintaining high optical transmittance.
5 June 2020 in ACS Applied Nano Materials