Ryan S. Crum

Ryan S. Crum

Auto-generated profile, based on publicly available information

Ryan S. Crum

Lawrence Livermore National Laboratory

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Processing and Application of Ceramics
Verified
Journal Article
Open access
PDF file
MASOUD SARRAFMASOUD SARRAF
MASOUD SARRAF
BRBushroa Abdul Razak
Bushroa Abdul Razak
RCRyan Crum
Ryan Crum
CGCarlos Gámez
Carlos Gámez
BRBrian Ramirez
Brian Ramirez
WBWan Jefrey Basirun
Wan Jefrey Basirun
Self-assembled nanotubular arrays on Ti alloys could be used for more effective implantable devices in various medical approaches. In the present work, the adhesion of TiO2 nanotubes (TiO2 NTs) on Ti-6Al-4V (Ti64) was investigated by laser spallation and scratch test techniques. At first, electrochemical anodization was performed in an ammonium fluoride solution dissolved in a 90:10 ethane-1,2-diol (ethylene glycol) and water solvent mixture. This process was performed at room temperature (23?C) at a steady potential of 60 V for 1 h. Next, the TiO2 nanotubes layer was heat-treated to improve the adhesion of the coating. The formation of selforganized TiO2 nanotubes as well as the microstructural evolution, are strongly dependent on the processing parameters and subsequent annealing. From microscopic analysis, highly oriented arrays of TiO2 nanotubes were grown by thermal treatment for 90min at 500?C. Further heat treatment above 500?C led to the detachment of the nanotubes and the complete destruction of the nanotubes occurred at temperature above 700?C. Scratch test analysis over a constant scratch length (1000 ?m) indicated that the failure point was shifted from 247.4 to 557.9 ?m while the adhesion strength was increased from ~862 to ~1814mN after annealing at 500?C. The adhesion measurement determined by laser spallation technique provided an intrinsic adhesion strength of 51.4MPa for the TiO2 nanotubes on the Ti64 substrate.

9 June 2017 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
BRB. J. Ramirez
B. J. Ramirez
OKO. T. Kingstedt
O. T. Kingstedt
RCR. Crum
R. Crum
CGC. Gamez
C. Gamez
VGV. Gupta
V. Gupta
The plateau stress and energy absorption of low density (≤300 kg/m3) polyurea (PU) foams and expanded polystyrene (EPS) were measured at deformation rates ranging from 0.004 s−1 to 5000 s−1. Low (≤10−1 s−1) strain rate testing was performed using an Instron load frame, intermediate (101–102 s−1) strain rates using a drop-weight impact tower, and high (≥103 s−1) strain rate conditions using a modified split-Hopkinson pressure bar. The plateau stress and energy absorption of low density PU foams exhibit a strong rate dependence across all deformation rates. This result has been previously unreported for low density polymer foams under low and intermediate strain rates. The strain rate sensitivity of PU foams was found to be strongly dependent on cell size for low strain rates and cell wall aperture size for intermediate and high strain rates. EPS type foam, however, remained nearly insensitive to strain rate. At low and intermediate strain rates, the plastic crushing in the EPS and the high plateau stress yield a much higher energy absorption capability than the viscoelastic dissipation in the PU foams. However, PU foams were found to display similar energy absorption properties as EPS based foams under high strain rates. Thus, controlling the strain rate sensitivity of PU foams through aperture diameter can lead to an increase in energy absorption properties at high strain rates, while simultaneously maintaining the peak stress below certain injury thresholds. Additionally, unlike EPS, which undergo plastic crushing after first impact, flexible polyurea foams will recover fully after each impact and thus will have multiple hit capabilities. This will allow these materials to have a wide range of applications, in advance body armors and protective headgears to use in low-cost protection systems for a wide range of military platforms, civilian, and space applications.

3 February 2014 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
DSDariush Seif
Dariush Seif
GPGiacomo Po
Giacomo Po
RCRyan Crum
Ryan Crum
VGVijay Gupta
Vijay Gupta
NGNasr M. Ghoniem
Nasr M. Ghoniem
Shock deformation of copper nano-films and nano-rods is examined with Molecular Dynamics (MD) simulations. The influence of the small system size on the onset of plasticity, its origin resulting from the nucleation of dislocation loops, and its reversible nature are determined. While simulations of large systems with periodic boundary conditions indicate that tremendous axial stresses are needed to induce plastic deformation in perfect copper crystals, the present results suggest that the stress levels needed to initiate irreversible plasticity in nano-rods are more than one order of magnitude smaller than what has been reported for bulk single crystals. MD studies of nano-films show that shock waves are purely elastic up until the Hugoniot elastic limit of PHEL ≈ 30–40 GPa, at which point Shockley partial dislocations are internally nucleated at the shock front. However, our recent experiments on shocked nano-rods show that plasticity is evident at much lower axial stress levels, on the order of 1–2 GPa. The present MD simulations of shocked nano-rods show that Shockley partial dislocations prefer to nucleate at lower stresses from the rod surface, at PHEL ≈ 1–2 GPa, consistent with our concurrent experimental observations, leading to surface step formation and mechanical damage. Nucleated dislocations are found to be Shockley partials in the [100] and [111] oriented nano-rods, with the additional presence of perfect dislocations in the latter. MD simulations of rarefaction shock waves in nano-films indicate that they can be spalled via a mechanism of nano-void nucleation, growth and coalescence at the spall plane. The origin of these nano-voids is shown to be at the intersection of stacking faults on conjugate slip {111} planes. Spallation by void nucleation and coalescence is found not to be achievable in nano-rods. Rarefaction shocks with high stresses were found to either severely deform or melt the nano-rod before it can be spalled.

11 January 2019 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
RCR. S. Crum
R. S. Crum
MHM. A. Homel
M. A. Homel
DPD. C. Pagan
D. C. Pagan
EHE. B. Herbold
E. B. Herbold
DMD. Miller
D. Miller
MAM. C. Akin
M. C. Akin
Dynamic compaction of granular materials is a complex process, wherein the material response at the continuum scale arises from fracture, comminution, and fragment flow at the grain scale. Granular materials have heterogeneity due to variation in grain properties as well as variation in local packing density and structure. These heterogeneities may affect the dynamic compaction response, producing a structured and time-varying compaction front. The methodology used to characterize the shock behavior in solid materials may be inappropriate for granular materials because of this unsteady behavior and interactions between the granular material and measurement surfaces. To observe the compaction front heterogeneity, in situ x-ray imaging of granular compaction is conducted at a scale between the grain- and continuum scales. To allow for sufficient x-ray transmission, a thin sample geometry is used, for which boundary affects may result in a significantly different load path than would occur in a 1-D compaction configuration. Numerical simulations of the experimental geometry support the analysis of the results so that the feature of the compaction front can be distinguished from artifacts of the experimental configuration. The results suggest that compaction front heterogeneity may have structure with a length scale of tens of particle diameters and demonstrate that finite grain size can inhibit the formation of shear-induced features that would arise in a homogenized representation of the same material.

9 June 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
AGA. Gupta
A. Gupta
RCR. S. Crum
R. S. Crum
CZChongpu ZHAI
Chongpu ZHAI
KRK. T. T. Ramesh
K. T. T. Ramesh
RHR. C. Hurley
R. C. Hurley
Understanding the particle-scale dynamics of granular materials during rapid compaction and flow is of fundamental importance for manufacturing, planetary science, geology, and defense applications. Time-resolved 2D radiography and static 3D x-ray tomography are powerful in situ tools for studying particle-scale dynamics but provide detail only in 2D or with significant time-scale limitations, respectively. Here, we introduce a new method that uses 2D in situ x-ray imaging for determining time-resolved 3D particle-scale dynamics in rapidly compressed granular materials. The method employs initial particle packing structures obtained from x-ray tomography, a 2D x-ray image generation algorithm, and an optimization algorithm. We first describe and validate the method using finite element simulations. We then apply the technique to x-ray phase-contrast images obtained during rapid compaction of granular materials with varying particle morphology and sample thickness. The depth-resolved particle-scale dynamics reveal complex velocity and porosity fields evolving heterogeneously along and perpendicular to the compaction direction. We characterize these features, their fluctuations near the compaction front, and the compaction front thickness. Our technique can be applied to understanding granular dynamics during rapid compaction events, and rearrangements during slower, but non-quasi-static, flows.

8 June 2020 in Physical Review Materials
Verified
Journal Article
Closed access
PDF file
AMA. Mandal
A. Mandal
BJB. J. Jensen
B. J. Jensen
MHM. C. Hudspeth
M. C. Hudspeth
SRS. Root
S. Root
RCR. S. Crum
R. S. Crum
MAM. C. Akin
M. C. Akin
In this work we provide direct evidence of shock-induced melting and associated kinetics in a porous solid (aluminum powder) using time-resolved x-ray diffraction. Unambiguous evidence of melting in 50% porous aluminum (Al) powder samples, shocked to peak pressures between ∼13−19GPa, was provided by the broadening of the Debye-Scherrer ring corresponding to the (111) peak. Shocked Al powder did not melt completely in any of our experiments within the durations of measurement. Incomplete (partial) melting of the powder, even after several hundreds of nanoseconds of shock loading, provides insights into thermal transport with Al powder particles under high-pressure dynamic loading. Such insights are quite valuable for developing well-constrained melting models and thermodynamic equations of state for porous Al and other porous solids relevant to planetary and materials science.