This work focuses on the effects of vegetation on a fluid flow pattern. In this numerical research, we verify the applicability of a simpler turbulence model than the commonly used k-" model to predict the mean flow through vegetation. The novel characteristic of this turbulence model is that the horizontal mixing-length is explicitly calculated and coupled with a multi-layer approach for the vertical mixing-length, within a general three-dimensional eddy-viscosity formulation. This mixing-length turbulence model has been validated in previous works for different kinds of non-vegetated flows. The hydrodynamic numerical model used for simulations is based on the Reynolds-averaged Navier–Stokes equations for shallow water flows, where a vegetation shear stress term is considered to reproduce the effects of drag forces on flow. A second-order approximation is used for spatial discretization and a semi-implicit Lagrangian–Eulerian scheme is used for time discretization. In order to validate the numerical results, we compare them against experimental data reported in the literature. The comparisons are carried out for two cases of study: submerged vegetation and submerged and emergent vegetation, both within an open channel flow.
1 January 2019 in Mathematical Problems in Engineering
This paper describes the development of a two‐dimensional water quality model that solves hydrodynamic equations tied to transport equations with reactions mechanisms inherent in the processes. This enables us to perform an accurate assessment of the pollution in a coastal ecosystem. The model was developed with data drawn from the ecosystem found in Mexico’s southeast state of Tabasco. The coastal ecosystem consists of the interaction of El Yucateco lagoon with Chicozapote and Tonalá rivers that connect the lagoon with the Gulf of Mexico. The results of pollutants transport simulation in the coastal ecosystem are presented, focusing on toxic parameters for two hydrodynamic scenarios: wet and dry seasons. As it is of interest in the zone, the transport of four metals is studied: Cadmium, Chromium, Nickel, and Lead. In order to address these objectives, a self‐posed mathematical problem is solved numerically, which is based on the measured data. The performed simulations show how to characterise metals transport with an acceptable accuracy, agreeing well with measured data in total concentrations in four control points along the water body. Although for the accurate implementation of the hydrodynamic‐based water quality model herein presented boundary (geometry, tides, wind, etc.) and initial (concentrations measurements) conditions are required, it poses an excellent option when the distribution of solutes with high accuracy is required, easing environmental, economic, and social management of coastal ecosystems. It ought to be remarked that this constitutes a robust differential equation‐based water quality model for the transport of heavy metals. Models with these characteristics are not common to be found elsewhere.
17 November 2014 in Journal of Applied Mathematics
A numerical research with different turbulence models for shallow water equations was carried out. This was done in order to investigate which model has the ability to reproduce more accurately the wakes produced by the shock of the water hitting a submerged island inside a canal. The study of this phenomenon is important for the numerical methods application advancement in the simulation of free surface flows since these models involve a number of simplifications and assumptions that can have a significant impact on the numerical solutions quality and thus can not reproduce correctly the physical phenomenon. The numerical experiments were carried out on an experimental case under controlled conditions, consisting of a channel with a submerged conical island. The numerical scheme is based on the Eulerian-Lagrangian finite volume method with four turbulence models, three mixing lengths (ml), and one joiningon the horizontal axis with a mixing-length model (ml) on the vertical axis. The experimental results show that awith ml turbulence model makes it possible to approach the experimental results in a more qualitative manner. We found that when using only amodel in the vertical and horizontal direction, the numerical results overestimate the experimental data. Additionally the computing time is reduced by simplifying the turbulence model.
1 January 2017 in Mathematical Problems in Engineering
In this work a fast computational particles tracer model is developed based on Particle‐In‐Cell method to estimate the sediment transport in the access zone of a river port area. To apply the particles tracer method, first it is necessary to calculate the hydrodynamic fields of the study zone to determine the velocity fields in the three directions. The particle transport is governed mainly by the velocity fields and the turbulent dispersion. The mechanisms of dispersion and resuspension of particles are based in stochastic models, which describes the movement through a probability function. The developed code was validated using two well known cases with a discrete transformation obtaining a max relative error around 4.8% in both cases. The simulations were carried out with 350,000 particles allowing us to determine under certain circumstances different hydrodynamic scenarios where the zones are susceptible to present erosion and siltation at the entrance of the port.
Climate change has unchained several natural extreme phenomena, including a major frequency and intensity of flooding episodes. From these, the ones of greatest importance are those which endanger human settlements as well as socioeconomic activities. This is the case of Tamuín city, settled in the shore of Tampaón River, in Mexico. In this work, we performed a detailed numerical modelling of the hydrodynamics of the zone, considering in situ topographic and bathymetric data as well as hydrodynamic parameters. Severe rainfall scenarios were simulated in order to determine the zones which are prone to flooding, as well as the potential periods of time between the beginning of the rainfall up to the flooding, considering the potential effects of climate change in the precipitation rate. The outcome of this research will help local governments undertake preventive actions to reinforce the identified risky zones, thus providing an adequate protection of rural and urban zones, as well as their inhabitants and their economical activities from current and future floods, considering potential climate change effects.