1 July 2021 in Thin-Walled Structures
15 March 2023 in International Journal of Mechanical Sciences
30 April 2019 in High Voltage
Operation data show lightning faults account for >70% for the main ultra‐high voltage (UHV) DC transmission channels, very different from the design view. In order to accurately master the lightning characteristics and the lightning protection performance of the line so as to propose solutions to weak points, this study firstly obtains and analyses the density and strength distributions of lightning risk source. Then the study proposes a set of risk assessment process where the key model electrogeometric model is improved according to the polarity effect of DC line. Then the work realises the calculation of the lightning shielding failure risk of single tower and whole line. The example shows the assessment result is consistent to the line's actual operation. Next, to further evaluate and predict the lightning risk in real time, the study adopts the backpropagation neural network algorithm to integrate the lightning detection data, atmospheric electric fields, and radar echoes to develop the early warning model of lightning risk source, and proposed a method to realise the early warning of lightning damage risk for UHV DC channels. The results show that the effective warning ratio is 73% and the failure‐to‐warn ratio is 27% which indicates very good application effects.
22 March 2022 in Engineering Structures
24 April 2023 in Journal of Sound and Vibration
12 June 2020 in Nanotechnology
In this paper, a modified method for predicting surface effect parameters based on experimental data is developed using the surface effect theory. Polyacrylonitrile (PAN) nanowires with diameters in a range of 100 nm – 320 nm are manufactured by electrospinning. The data of the effective elastic moduli of PAN nanowire varying with diameters are obtained by experimenting with contact atomic-force microscopy (C-AFM). It was found that the effective Young’s modulus of nanowires increased with the diameter of the nanowires decreases. The validity of the method in this paper are confirmed by comparing with the existing work. By taking into account the effect of surface energy on the bending, the deviation of the prediction of surface effect parameters in the existing work is solved. The current results will also be useful for predicting nanowire surface effect parameters and be helpful for the design of nanostructures and nanodevices related to nanowires.