The exploitation of solar energy, an unlimited and renewable energy resource, is of prime interest to support the replacement of fossil fuels by renewable energy alternatives. Solar energy can be used via concentrated solar power (CSP) combined with thermochemical energy storage (TCES) for the conversion and storage of concentrated solar energy via reversible solid–gas reactions, thus enabling round the clock operation and continuous production. Research is on-going on efficient and economically attractive TCES systems at high temperatures with long-term durability and performance stability. Indeed, the cycling stability with reduced or no loss in capacity over many cycles of heat charge and discharge of the material is pursued. The main thermochemical systems currently investigated are encompassing metal oxide redox pairs (MOx/MOx−1), non-stoichiometric perovskites (ABO3/ABO3−δ), alkaline earth metal carbonates and hydroxides (MCO3/MO, M(OH)2/MO with M = Ca, Sr, Ba). The metal oxides/perovskites can operate in open loop with air as the heat transfer fluid, while carbonates and hydroxides generally require closed loop operation with storage of the fluid (H2O or CO2). Alternative sources of natural components are also attracting interest, such as abundant and low-cost ore minerals or recycling waste. For example, limestone and dolomite are being studied to provide for one of the most promising systems, CaCO3/CaO. Systems based on hydroxides are also progressing, although most of the recent works focused on Ca(OH)2/CaO. Mixed metal oxides and perovskites are also largely developed and attractive materials, thanks to the possible tuning of both their operating temperature and energy storage capacity. The shape of the material and its stabilization are critical to adapt the material for their integration in reactors, such as packed bed and fluidized bed reactors, and assure a smooth transition for commercial use and development. The recent advances in TCES systems since 2016 are reviewed, and their integration in solar processes for continuous operation is particularly emphasized.
The high risk of CO poisoning justifies the need for indoor air quality control and warning systems based on the detection of low concentrations (ppm‐ppb) of CO. Cobalt corrole complexes selectively bind CO vs. O2, CO2, N2, opening new fields of applications. By combining the CO chemisorption properties of cobalt corroles with the known sorption capacity of MOFs, we hope to obtain high performance sensing materials for CO detection. In addition, the exposed metal sites of MOFs lead to CO2 physisorption, allowing the co‐detection of CO and CO2. In this work, PCN‐222, a stable Zr‐based MOF made from Ni(TCPP) with natural vacancies, has been used as a porous matrix for the grafting of electron‐poor metallocorroles. The materials were characterized by powder XRD, SEM and optical microscopy, BET analyses and gas adsorption measurements at 298 K. No degradation of the crystalline structure of PCN‐222 was observed. At 1 atm, the adsorbed CO(g) volumes measured for the best materials were 12.15 cm3 g−1 and 14.01 cm3 g−1 for CoCorr2@PCN‐222 and CoCorr3@PCN‐222 respectively, and both materials exhibited high CO chemisorption and selectivity against O2, N2, and CO2 at low pressure due to the highest energy of the chemisorption process vs physisorption.