24 April 2023 in Journal of Lightwave Technology
We extend the transmission distance of 400GBASE-LR4 and 400GBASE-LR8 systems by introducing simple and ultrawideband single-stage bismuth-doped fiber amplifiers (BDFAs). The transmission reach of emerging 400GBASE-LR4 and 400GBASE-LR8 transceivers was successfully extended from 10 km to 20 and 90 km, respectively. The transmission links were stable over seven days for both systems. Furthermore, we demonstrate that the transmission reach was maximized up to the chromatic dispersion limit and show the applicability of BDFAs for upgrading the transmission reach of cost-effective transceivers to meet the requirements of 400ZR applications. This offers a reasonable solution for improving the power budget and extending the reach of existing data center interconnections with 400GBASE-LR4/LR8 transceivers.
4 March 2024 in IEEE Access
This paper explores, through the utilization of analytical models and simulations, the bit error rate (BER) of 400GBASE-LR8/ER8 in back-to-back configuration, considering various extinction ratio (ER) values and photodetector types. Simulation of transmission over fiber is carried out to measure chromatic dispersion (CD) penalty in each scenario. To increase the distance, we simulated a multi-span transmission with inline optical amplifiers (OAs). We mitigated the effects of CD-induced power fading by employing equalization such that the channel under test (CUT) at 1274 nm could reach 7×30 km. The effects of fiber nonlinearity were also investigated for both single-channel and 3 wavelength division multiplexing (WDM) at various channel spacings. Moreover, the relationship between ER and peak-to-average-power ratio (PAPR) at different distances was investigated. An ER optimization for a highly accumulated CD multi-span fiber link with amplification was effective in improving the BER. Finally, we successfully transmitted a 26.56 GBaud 4-level pulse amplitude modulation (PAM-4) signal up to 8×30 km with the optimal ER of 5 dB.
28 October 2022 in IEEE Access
This paper proposes an optimized 16-chip multi-level phase-shifted optical code division multiplexing (OCDM) en/decoder for 4-level pulse amplitude modulation (PAM-4) format by using an amplitude-shaping (AS) technique. The optimized en/decoder can efficiently suppress the crosstalk and the primary beat noise (PBN). The code detection performance for 4-OCDM PAM-4 becomes the lowest to our knowledge. The numerical bit error rate analysis and the back-to-back simulation are shown. We also successfully demonstrate by computer simulation a 100 Gbps/λ enabling by 12.5 GBaud 4-OCDM PAM-4 transmission in O-band over 6×30 km with in-line optical amplifiers.
30 August 2018 in IEEE Access
We propose an amplitude-shaping (AS) technique to shape an en/decoded signal in 10-Gb/s coherent time-spreading optical-code division multiplexing (OCDM) with ON-OFF keying modulation format, using 16-chip multi-level phase-shifted keying en/decoders. By employing this technique, the primary beat noise and the multiple access interference can be suppressed, and the code detection performance is improved. The bit error rate and the power penalty of the 8 × 10 Gb/s AS-OCDM, obtained from the calculation and the simulation, are improved, in comparison with the conventional OCDM system.
15 June 2026 in IEEE Access
Optical Inter-Satellite Links (O-ISLs) in Low Earth Orbit (LEO) constellations enable low-latency, high-throughput global communication and are a key enabler of future Non-Terrestrial Networks (NTN) under 5G Advanced, 6G and beyond. This paper presents a simulation framework that integrates realistic orbital propagation from Two-Line Element (TLE) data with physical layer constraints, including Doppler shift, geometric visibility, and hardware limits on Pointing, Acquisition, and Tracking (PAT) terminals, to evaluate dynamic, latency-aware routing. Our results show that Doppler shifts are governed by relative velocity vectors rather than link distance, with most values within±5 GHz, confirming compatibility with current optical transceiver capabilities. Our analysis spans the full spectrum of routing distances to characterize network performance. At the regional scale, a Bangkok–Tokyo route demonstrates consistent latencies of 65–80 ms and bit rates above 6.5 Gbps under a two-PAT limit. Progressing to the global scale, a nearly antipodal route (Bangkok–Los Angeles) reveals a quantifiable trade-off between latency and throughput as a function of maximum ISL distance. These findings validate the feasibility of O-ISL-enabled NTN architectures and provide quantitative guidance for routing strategies and physical layer design in large-scale LEO constellations.