10 July 2020 in Materials Performance and Characterization
The determination of the interlaminar properties of laminate composites to date has included a few direct measurement techniques: the standardized short-beam test via three-point flexural testing and the double beam shear test via five-point flexural testing. These test methods are limited to a determination of the apparent interlaminar strength, whereas the full stress–strain behavior cannot be determined. The double beam shear test allows for a calculation of the shear modulus, provided that four additional elastic, in-plane properties have been determined in advance via three additional types of tests. The present work includes a comparison of the three-point short-beam test, the nonstandardized four-point flexural test, and the double beam shear test (requiring small span-length-to-thickness ratios for the shear loading to become dominant). The tests are carried out on unidirectional carbon fiber–reinforced composite (CFRP-UD) with a symmetric layup. The experiments are accompanied by photomechanical investigations using digital image correlation (DIC) to visualize the phenomenology of shear deformation. The novelty of this approach includes the use of the DIC-determined shear strains, which show a parabolic distribution across the specimen’s thickness. The DIC-calculated maximum shear strain across the thickness is used for a full description of the stress–strain behavior with a focus on the elastic loading range to evaluate the shear modulus. Interlaminar shear strengths and shear moduli determined from all three types of tests are compared with the intralaminar shear properties.
30 March 2024 in Composite Structures
28 May 2025 in Journal of Composite Materials
A safe design of composite tanks for liquid hydrogen is one of the strongest challenges in the coming years. This paper describes an approach to characterize the influence of cryogenic temperature on the mechanical properties of a thin-ply carbon/epoxy material manufactured by wet filament winding. The aim is to obtain the properties required for lightweight design of a suitable thin-ply layup for future use as a cylindrical tube in a linerless tank for storage of liquid hydrogen at cryogenic temperature and interior pressure. A methodology is presented for determining the ply properties required as input parameters in analytical models describing the constitutive relationships, strength-based failure criteria, and fracture mechanics for in-situ strength predictions within thin-ply theory. Therefore, tensile and shear behavior, as well as interlaminar toughness of flat wet filament wound laminates have been determined experimentally at room and cryogenic temperature. Additionally, the variation of coefficients of thermal expansion and dynamic mechanical analyses over temperature have been investigated. Since the ply properties are a function of the fiber volume fraction and quality obtained during wet filament winding, an integration of micromechanics is provided on how to adjust properties based on different fiber volume fractions obtained from nominally unidirectional coupon specimens for use in design of real angle-ply cylinders. A methodology is proposed to reach the relevant mechanical properties for design making use of a limited set of experimental properties, based on challenges to test at −253°C (20 K). An outlook on potential improvements regarding mechanical testing at cryogenic temperature is provided.