23 October 2024 in Nature Photonics
Processing information in the optical domain promises advantages in both speed and energy efficiency over existing digital hardware for a variety of emerging applications in artificial intelligence and machine learning. A typical approach to photonic processing is to multiply a rapidly changing optical input vector with a matrix of fixed optical weights. However, encoding these weights on-chip using an array of photonic memory cells is currently limited by a wide range of material- and device-level issues, such as the programming speed, extinction ratio and endurance, among others. Here we propose a new approach to encoding optical weights for in-memory photonic computing using magneto-optic memory cells comprising heterogeneously integrated cerium-substituted yttrium iron garnet (Ce:YIG) on silicon micro-ring resonators. We show that leveraging the non-reciprocal phase shift in such magneto-optic materials offers several key advantages over existing architectures, providing a fast (1 ns), efficient (143 fJ per bit) and robust (2.4 billion programming cycles) platform for on-chip optical processing.
6 October 2020 in Optics Express
Nonvolatile optical switches are promising components for low-power photonic integrated circuits with multiple functionalities. In this study, we experimentally demonstrate magneto-optical switches integrated with a magnet array. Optical switches in both microring and Mach–Zehnder configurations are fabricated on a high-quality single-crystalline magneto-optical material Ce:YIG. The switched state is alternated by a current-induced magnetic field from an integrated electromagnet and remained without any external power supply owing to the nonvolatile magnetization of thin-film magnets. Subsequently, the arbitrary level control of optical transmission is demonstrated by changing the magnetization state of integrated thin-film magnets with a current applied in the microring gate switch, and a maximum switching ratio over 25 dB is achieved in the Mach–Zehnder switch. The latching operation is presented with a 1-µs pulsed voltage.
4 August 2023 in Optics Express
Optical isolators provide one-way propagation and are necessary to protect laser diodes from damage and unstable operation caused by reflected light. Although magneto-optical (MO) devices can operate as isolators, achieving high-density integration using conventional direct bonding methods is difficult because a large and thick growth substrate remains on the circuits. We experimentally demonstrated a compact Mach–Zehnder interferometer-based MO isolator with Si waveguides by the µ-transfer printing of a Ce:YIG/SGGG coupon. The isolator has a footprint of 0.25 mm2 with a Ce:YIG/SGGG coupon of 50 × 800 µm2 and ∼ 1-µm thickness and achieved a maximum isolation ratio of 14 dB in telecom bands.
29 August 2025 in Optics Express
The heterogeneous integration of thin-film lithium niobate (TFLN) provides energy-efficient broadband optical modulation of photonic platforms. Micro-transfer printing (µ-TP) yields dense integration of heterogeneous materials and cost-effective photonic integrated circuits. However, the reports so far have considered unpatterned slab membranes for the structure of the µ-TP integrated TFLN, and the short interaction length increases the driving voltage. In this study, the µ-TP of pre-structure-defined TFLN Mach-Zehender (MZ) interferometer was demonstrated for up to 1.1 cm with propagation loss of 0.7 dB/cm. The TFLN MZ modulator integrated on a silicon substrate using µ-TP exhibited the lowest driving voltage Vπ of 2.7 V and a modulation bandwidth of 28 GHz with a low insertion loss of 0.97 dB. In addition, modulation frequencies exceeding 50 GHz and Vπ of 8.9 V were demonstrated in a device with 3-mm-long electrodes.
10 May 2022 in Optics Express
Thermomagnetic recording is a technique used as a writing process for magneto-optical (MO) drives. Despite their significant advantages, such as rewritability, nonvolatility, reliability, and large cycling endurance, MO drives are rarely used today because of the complex drive systems that must deal with magnetic field and lightwave simultaneously. This study reports on the light-induced thermomagnetic recording of a ferromagnetic thin-film CoFeB on a Si photonic platform. Lightwave guided in the Si waveguide evanescently coupled to the thin-film magnet and underwent optical absorption, resulting in heating and a decrease in coercive force. Therefore, we observed magnetization reversal with an applied magnetic field for both continuous and modulated light pulses using a magneto-optical Kerr effect microscope, and the light-induced thermomagnetic recording was experimentally demonstrated on a Si photonic platform. The proposed scheme enables the realization of on-chip MO memories on the Si photonic platform in which neither bulky free-space optics nor mechanical rotation systems are required.
1 July 2019 in Japanese Journal of Applied Physics
A microring resonator (MRR) can enhance optical modulation and reduce a device’s footprint in photonic integrated circuits. However, optical devices composed of MRRs have narrow operation bandwidths. Furthermore, the resonant wavelength of the MRR is highly sensitive to variations in ambient temperature. In this study, we experimentally demonstrate a magneto–optical (MO) microring switch with wavelength tunability. The switch consists of a hydrogenated amorphous silicon (a-Si:H) MRR on an MO single crystalline garnet, Ce:YIG. By controlling an external magnetic field generated from an integrated electromagnetic coil, nonreciprocal phase shifts in the Ce:YIG are induced and an MO switch is successfully operated with low power consumption owing to the structure, compared with the conventional design. Moreover, by combining both MO and thermo–optic effects, the broadband wavelength-tunable operation of switching is achieved without an additional heater.