25 June 2020 in Nonlinear Dynamics
24 November 2020 in IEEE Access
This paper presents a string stable controller for the autonomous operation of a platoon of Heavy Commercial Road Vehicles (HCRVs) in a connected environment. This study considers factors such as brake/powertrain actuator dynamics, resistive forces, tyre model and wheel dynamics, which are crucial during on-road operation of HCRVs. A nonlinear vehicle dynamic model encompassing all these factors has been considered. The dependency between aerodynamic drag and inter-vehicular distance in the platoon has also been taken into account. The aforementioned factors motivated the use of Sliding Mode Control (SMC), which is a nonlinear and robust control technique. A lower level Proportional Integral Derivative (PID) controller has been successfully integrated with SMC to compensate for pneumatic brake and powertrain system delay. The designed controller was evaluated for string stable platoon operation by considering various road conditions, load conditions and operating speeds. It was observed that the string stable controller performance is highly dependent on the operating conditions. To ensure string stable operation for different operating scenarios, an adaptive time-headway based enhancement has also been integrated in the controller design. The efficacy of the proposed adaptive time-headway policy over the existing constant time-headway policy has been methodically analysed and a performance comparison between them has also been presented. The aspect of communication delay during connected vehicular operation has also been studied and the maximum tolerable communication delay magnitude for maintaining string stable operation has also been presented.
15 March 2023 in IEEE Access
Even though diesel-powered Heavy Goods Vehicles (HGVs) are major contributors of greenhouse gas emission, HGV electrification is still in its infancy owing to various challenges. Costlier and heavier batteries and lack of charging infrastructure along long routes are the major bottlenecks in the realisation of HGV electrification for long-haul freight transportation. In this regard, adopting technologies that can make HGV electrification viable is vital to aid the transportation sector decarbonisation. Benefiting from approaches such as the use of overhead catenary power, and conforming to operate in a platoon formation, it would be possible to considerably reduce the cost of HGV electrification and make it economically feasible. Utilising overhead catenary infrastructure would result in requiring economical charging infrastructure, shorter charging cycles, and smaller batteries, while not compromising on the overall payload of HGVs. HGVs in platoon formation result in energy consumption reduction and increased traffic throughput. This paper investigates the benefits of using overhead catenary-powered electric HGVs for freight transportation and also explores the advantages associated with electric HGV platoon formations on the same. The feasibility analysis has been done with the support of close to real physics-based electric HGV models on realistic operating scenarios adopting an in-service highway drive cycle. From the analysis, electric HGV platooning using overhead catenary as the power source was found to be economical with ≈ 10.4% reduction in electricity cost when compared to without platooning while devising electrification strategies for long-haul freight transportation.
10 April 2020 in Nonlinear Dynamics
29 March 2021 in Journal of Vibration and Control
Integration of heavy commercial road vehicle platooning concept and electric vehicle technology is a promising approach as far as sustainable freight transportation is considered. This article attempts to design a string stable controller for an electric heavy commercial road vehicle platoon by incorporating critical factors such as complete vehicle dynamics model, pneumatic brake system model and cooperative braking between friction and regenerative braking systems. The sliding mode control technique has been used for string stable platoon operation. The impact of various battery pack locations on string stability has also been analysed. The performance of the controller has been investigated by considering electric heavy commercial road vehicle platoon operation on different road slope (straight, uphill and downhill) conditions, dry and wet road conditions and vehicle load conditions. It has been observed that the battery pack location has a significant influence on string stability with respect to the platoon operating conditions. During operation on straight and level roads, string stability was achieved irrespective of the location of the battery pack. However, during downhill and uphill driving conditions, it was found that placing the battery pack near front and rear axle locations, respectively, helped in ensuring string stable platoon operation.