Dual-main-phase (DMP) magnets, a promising approach for the efficient utilization of high-abundance rare earth elements, exhibit enhanced coercivity compared to single-main-phase (SMP) magnets. This study demonstrates that a DMP magnet exhibits a 43 kA/m coercivity increase over an SMP magnet of equivalent composition. Microstructural characterization reveals two main-phase grains with distinct core–shell structures in the DMP magnet. Micromagnetic simulations indicate that the increased Nd content enhances the anisotropy field of the shells in Ce-rich grains, crucially contributing to the coercivity enhancement. Conversely, Nd2Fe14B grains do not significantly enhance coercivity. A micromagnetic model, constructed by substituting Nd2Fe14B grains with (Nd0.5Ce0.5)2Fe14B grains, demonstrates a slight coercivity increase compared to the DMP magnets. Moreover, retaining only the core–shell structure in grains near the end faces maintains higher coercivity than that of DMP magnets. Experimental results of DyCoCu grain boundary diffusion show a 406 kA/m coercivity increase in the DMP magnet, less than the 510 kA/m increase in the diffused SMP magnet. Although diffusion significantly increases the anisotropy field in the shell, the core region of the Ce-rich grains maintains a low anisotropy field, limiting magnetic property enhancement. These findings underscore the critical role of an optimized core–shell structure in enhancing coercivity for Ce-rich magnets, suggesting that the DMP method may not represent the most effective strategy.
The abnormal growth of grains near the surface of NdCeFeB magnets reduces the number of grain boundaries, and meanwhile, the formation of REFe2 phase also hinders the diffusion of rare earth elements, both of which limit the enhancement of magnetic properties. This poses a certain challenge for the preparation of high Ce content NdCeFeB magnets. In this work, it is found that the TbPrNdAl diffusion source can suppress the mutual diffusion between Ce in the main phase and rare earth elements in the diffusion source, thereby restraining the abnormal growth of grains and inhibiting the formation of REFe2 phase. Eventually, a more uniform core-shell structure and thin and continuous RE-rich phase are formed. The coercivity of 1389 kA/m and magnetic energy product of 289 kJ/m3 can be obtained without reducing the remanence, which are 612 kA/m and 30 kJ/m3 higher than those of the initial magnet, respectively. This diffusion source can greatly promote the development of NdCeFeB magnets with high Ce content.
Developing a grain boundary diffusion process for Ce-rich Nd–Ce–Fe–B magnets by light rare earth remains a challenge. The underlying mechanism that limits the coercivity enhancement of Nd–Ce–Fe–B magnets by Pr80Al10Ga10 alloy diffusion is revealed in this work. The conventional grain boundary diffusion can promote the formation of a Pr-rich phase at the triple junctions but fails to achieve continuous grain boundary for magnetic isolation. The diffusion of Pr into the (Nd, Ce)2Fe14B grains is accompanied by the substitution of Nd and migration of Ce, which limits the increase in magnetic anisotropy field in the grain surface. To solve this problem, we propose a two-step diffusion approach to improve the diffusion efficiency of Pr80Al10Ga10 alloy. A high-temperature diffusion at 900 °C is employed to construct a Pr-rich shell with a high anisotropy field around main phase grains, followed by low-temperature diffusion at 800 °C to establish continuous non-magnetic grain boundary phases. By this approach, a coercivity enhancement of 4.3 kOe has been obtained in an Nd–Ce–Fe–B magnet with 26 wt. % Ce substitution for Nd. This work provides a scalable route for fabricating high-performance and cost-effective Ce-rich Nd–Ce–Fe–B magnets by light rare earth diffusion.