1 July 2012 in Materials Technology
The nanotubular architectures of metal oxides have emerged as a fascinating class of nanomaterials because of their superior performance in numerous applications, such as gas sensing, drug delivery and electronic and optoelectronic device. One of the most powerful and now extensively synthesising methods for nanotube (NT) structures relies on solid state templates and sol–gel to control the diameter and length of nanostructures. Among the metal oxides, TiO2 and SnO2 are the functional semiconductor oxides for their wide applications in nanodevice. It is meaningful to prepare the TiO2 oxide NT compositing the SnO2 component. In this work, the synthesis of nanotubular architectured composite materials consisting of TiO2 and SnO2 by the combination of the sol–gel chemical method and the anodic aluminium oxide templating method is reported. The method can control the diameter and tube end morphology, and the as obtained products were characterised by X-ray diffractometry, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectrometry. The diameter of the composite NT is ∼150 nm with open tube end. The composite NTs are composed of mixed oxides of Sn, O and Ti. The mechanisms of formation of NTs have been elucidated. The reported results are expected to have a significant impact on synthesising other binary oxide NTs.
1 January 2024 in Recent Patents on Engineering
Background: Capacitive micromachined ultrasonic transducers (CMUTs) is a promising component of mechanical-electrical-acoustical conversion, which shows valuable applications in non-distructive testing and obstacle detection fields. In order to study the influence of dimension parameters on the directivity of CMUTs, the three-dimensional multi-physics coupling model is proposed for CMUTs in this paper. Methods: The model combines multiple physical fields through finite element method (FEM), which is more efficient and accurate. The influence of dimension parameters on the transducer is studied from two aspects: the pitch between adjacent cells and cell number, respectively. Results: When increasing the pitch, the directivity becomes better if the pitch is less than half of the wavelength, the grating lobe and side lobe are aroused. However, the bandwidth at -3dB is reduced by up to 71.1% at the same time. When increasing the cell number, the better the direcitvity, while the change of the cell number has little effect on the bandwidth of the array. However, 5.4% frequency shift was caused due to the effective mass change of the transducer. Conclusion: In this study, a 3D model based on FEM is proposed for the influence of dimension parameter on CMUTs. The simulation results indicate that the directivity can be enhanced by changing the dimension. At the same time, it also introduces other performance issues, such as bandwidth decrease and frequency shift through this approach. Therefore, the simulation proposed the guidance of CMUTs performance optimization and patented technology application work in the future.