28 January 2022 in IEEE Transactions on Antennas and Propagation
The smart radio environment has become an eye-catching topic and is believed to own great potential in future wireless networks. Its essential demand lies in sensing and manipulating the electromagnetic (EM) fields accurately and simultaneously with the same aperture, which is hard to achieve using conventional methods due to the difficulty in integrating different systems. We propose a millimeter-wave space–time-coding digital metasurface (STCM) to realize simultaneous in situ direction finding and field manipulation. An analytic method of direction finding is first developed using the STCM modulated by a space–time-coding (STC) matrix while maintaining its original capability of EM field manipulations. In addition, three STC matrices corresponding to different EM functions are applied to the STCM to verify the feasibility and robustness of direction findings experimentally. Finally, a proof-of-concept prototype is built to exhibit different EM functions according to the incident angle detected simultaneously. The proposed concept sets the stage for the integrated implementation of the perception and response of the radio environment, which may find promising applications in future intelligent wireless networks and self-adaptive systems.
11 January 2022 in IEEE Transactions on Antennas and Propagation
This article presents a reconfigurable multifunctional metasurface (RMM) with independent control of orthogonally polarized waves. Each meta-atom of RMM has four varactor diodes (two sets of orthogonal parallel diodes) connected and voltage biased. The voltage difference of the two sets of parallel varactor diodes is a constant. Thus, the orthogonally polarized reflected wave can be tuned independently. Unlike in other reported voltage-controlled RMMs, in the developed RMM, biasing voltages can be applied in one direction only. A tunable range from 7.2 to 7.8 GHz can be achieved. Two functionalities of the proposed RMM, namely, beam steering and polarization conversion, are demonstrated numerically and experimentally. Beam steering can be independently achieved in the ${x}-/y$ -directions when the incident plane wave is an $x-/y$ -polarized plane wave. For an arbitrary linear polarized incident plane wave, the decomposed orthogonally polarized waves can also be reflected toward two predefined directions based on the dual-polarized independent tunability of the proposed design. As for polarization conversion, the reflected waves can be flexibly switched among linear-to-orthogonal (LP-to-XP), linear-to-circular, and linear-to-elliptical polarizations in the operating frequencies depending on the phase requirement. The polarization conversion ratio is up to 90% for LP-to-XP polarization and the axial ratio is smaller than 3 dB for linear-to-circular polarizations.
8 October 2020 in IEEE Antennas and Wireless Propagation Letters
A wideband, low-profile dipole-patch antenna(DPA) element consisting of a printed dipole and four tightly-coupled microstrip patches is proposed. The element, housed in a substrate-integrated-waveguide(SIW) cavity, is differentially fed by two vias residing on the opposite sides of a dumbbell-shaped aperture. The simulated results reveal that it operates from 22.3 to 32.1 GHz for SWR 2 with a peak gain of 9.6 dBi, low crosspolarization level less than -25 dB and stable radiation patterns across the operating band. The element thickness is only 0.0710, where 0 is free-space wavelength at the center frequency of 27.2 GHz. An SIW-fed 88 antenna array with non-uniform power distribution is then designed, fabricated and measured to verify the properties of the element. The measured E- and H-plane radiation patterns are stable across the operating band with sidelobe and cross-polarization levels below -17 dB and -22 dB, respectively.
8 April 2022 in IEEE Transactions on Antennas and Propagation
This article proposes a low-profile, dual-polarized $4\times 4$ antenna array for the fifth-generation (5G) applications. It originates from our previous linear-polarized design, but with two split dipoles. For each polarization, the current on the split dipoles will cancel each other out in one direction. In contrast, in the orthogonal direction, the current can be regarded as a driven dipole to couple energy to four parasitic patches. The proposed element has a profile of only $0.073\lambda _{0}$ (where $_{\mathrm {}}\lambda _{0}$ is one free-space wavelength at 27.85 GHz) with simulated standing wave ratio (SWR) < 2 from 22.11 to 33.6 GHz (BW ≈ 41.25%). The average gain is 8 dBi, and the peak gain reaches 10 dBi at approximately 31.5 GHz. Besides, the two polarizations possess almost the same performance due to the symmetry of the antenna. A 4 $\times 4$ antenna array is designed, simulated, and experimentally demonstrated based on a subarray that can support two orthogonally mode excitations. The measured results present an overlapped bandwidth of 28.4% and more than 25 dB isolation. In addition, the maximum gains are up to 19 and 18.9 dBi for Ports 1 and 2 excitations, respectively. Our proposed design has great application potential in vehicle-mounted millimeter-wave radar and 5G communications systems.
9 February 2022 in IEEE Antennas and Wireless Propagation Letters
A deep-learning enabled discrete dielectric lens (DDL) antenna with terahertz hologram reconfigurability is proposed. The antenna is constructed by two cascaded discrete dielectric lenses, which are designed based on a diffractive deep neural network (D 2 NN) with an improved loss function, fed by a static horn. The DDL antenna can achieve dynamic holographic imaging by a simple mechanical translation of the perfect electric conductor (PEC) mask attached to the first lens instead of locally controlling individual meta-atoms through incorporating active elements or phase change materials with complicated feeding networks. The phase profiles for the DDL antenna design are obtained by training four customized input field patterns and corresponding anticipated output target images with the modified D 2 NN. Dynamic switching of four number images “1, 2, 3, 4” is demonstrated by both full-wave simulated and experimental results. The proposed DDL antenna and design strategy present a new approach to achieve wavefront reconfiguration, especially in the absence of tunable components at high frequencies.
4 October 2022 in IEEE Transactions on Antennas and Propagation
This paper proposes a novel dual-polarized shared-aperture antenna array with wide bandwidth by carefully designing and tightly arranging the elements. The single element comprises four L-probes and four parasitic patches, differentially fed by microstrip lines for each polarization, with a profile of around 0.073λ 0 (λ 0 is one free-space wavelength at the center frequency). Simulated results show that the impedance bandwidth (| S 11 | < –10 dB) is 35% for both orthogonal polarizations, with a low cross-polarization level and a peak gain up to 9.7 dBi. The shared-aperture property is investigated using two 1 × 2 arrays. Subsequently, two 4 × 4 dual-polarized arrays with ideal differential feeds are employed to illustrate how the proposed shared-aperture approach can improve the aperture efficiency. Finally, a dual-polarized 4 × 4 array prototype with microstrip line feeding networks arranged in different layers is designed, fabricated, and experimentally verified. It presents an overlapped bandwidth of 25.4% from 23 to 29.7 GHz for the two orthogonal polarizations, a peak gain of 19.8 dBi, and an isolation larger than 18 dB. Most of all, the 4 × 4 array occupies only a size of 3.32λ 0 × 3.28λ 0 × 0.087λ 0 .