5 November 2021 in IEEE Transactions on Intelligent Transportation Systems
This paper details a method to improve accuracy of the land vehicle attitude estimation. It employs the vehicle model constraints to enhance the integration of GPS and a low-cost MEMS inertial measurement unit (MIMU) (GPS/MIMU). To improve the yaw angle estimation, we propose a lateral velocity constraint (LVC) aided method based on the observability analysis for the integrated fusion system. The theoretical analysis indicates that the yaw angle will be directly observed if LVC is augmented into the GPS/MIMU fusion algorithm. Furthermore, for LVC/MIMU system without GPS, the roll angle is always well estimated regardless of whether the vehicle is moving or stationary, and, surprisingly, the pitch angle can also be relatively accurately estimated if the vehicle is moving. Thus, when GPS is unavailable, the LVC/MIMU fusion is proposed by replacing the GPS measurement with the virtual measurement LVC. It is an encouraging improvement since the accumulating errors induced by gyro bias can be suppressed using MIMU alone. Moreover, to overcome the shortage that the pitch angle is not observed if the vehicle is stationary, we propose to fuse the gyros with gravity-based angles by Kalman filtering if the vehicle is detected motionless based on a switching rule. The experimental results compare favorably to theoretical analysis, showing that the proposed method can effectively improve the accuracy for land vehicle attitude estimation.
10 March 2021 in IEEE Transactions on Instrumentation and Measurement
In this article, we develop a novel method to improve the accuracy of the low-cost vehicle attitude estimation using singular spectrum analysis (SSA) and independent component analysis (ICA). The microelectromechanical system (MEMS) accelerometers and the MEMS gyros are fused by the Kalman filtering algorithm to provide a low-cost attitude estimation. The low-frequency vibration noise and the maneuvering acceleration disturbance in the measurements of the MEMS accelerometers introduce large errors to the attitude estimation. To mitigate the low-frequency vibration noise, we propose a method based on SSA to separate the quasi-periodic components in accelerometer measurements and keep the trend remained as the true attitude measurement. SSA is effective in decomposing original signal into trend, periodic or quasi-periodic components, and thus, the low-frequency vibration noise that behaves as a quasi-periodic signal can be well separated. However, the acceleration disturbance still exists in the trend. Thus, a method based on ICA is then proposed to remove the acceleration disturbance by the aid of the turning rate measurement. The proposed method is verified with driving tests under city road and off-road conditions, showing a significant improvement of the attitude accuracy.
12 July 2021 in IEEE Transactions on Instrumentation and Measurement
This article presents a newly invented emergency positioning system deployed on a satellite communication on-the-move (SOTM) platform, which can extend the SOTM communication function to the positioning function. Inherent to the SOTM system's high reliability, this emergency positioning system can effectively estimate the vehicle's position by fusing a geosynchronous orbit (GEO) satellite Doppler frequency observation and inertial navigation system (INS) of a SOTM-mounted moving vehicle when the global navigation satellite system (GNSS) is unavailable. It is a great challenge to use GEO Doppler frequency measurement with weak observability to correct the INS's cumulative error to estimate the position of the vehicle. In this article, the traditional inertial measurement unit (IMU) pre-integration model is improved to meet the needs of large-scale and high-precision navigation. In addition, we use graph optimization (GO) to estimate all states in the trajectory, which can effectively improve the observability of the error and reduce the nonlinear influence. We evaluated the system on a Ku-band SOTM platform, and the experimental results indicate that the system can achieve a convergent positioning accuracy of tens of meters. This method can provide emergency positioning in the case of GNSS interference.
12 July 2021 in IEEE Transactions on Instrumentation and Measurement
Current orientation estimation system (OES) approaches can meet the Satcom-on-the-move (SOTM) accuracy requirement in low dynamics using inertial measurement unit (IMU) without Global Navigation Satellite System (GNSS). However, the estimation accuracy will decrease significantly due to the influence of the high dynamics of the vehicle. This article addresses this issue by constructing a multi-state constraint optimization-based OES (MSCO-OES). Our first contribution is a high-precision incremental inertial constraint, which adds the influence of the earth's rotation to the rotation part of the pre-integration theory to maintain the integral gyro accuracy for a longer time. The second contribution is that the nonlinear optimization method is applied to orientation estimation, making better use of historical information and having higher estimation accuracy and robustness through batch optimization and iterating. In addition, we use the lie group theory to extend the weighted least square estimation algorithm to the manifold, which can update multiple historical states to the current state in real-time through incremental inertial constraints. Compared with state-of-the-art methods, the proposed orientation estimation method has higher estimation precision and a reasonable calculation amount. The performance of the proposed method is demonstrated by comparing tests and SOTM deploying tests. Several high-dynamic and long-range tests show that the proposed OES has acceptable orientation estimation precision and reliability, which meets the high-reliable SOTM system requirements.