22 March 2016 in IEEE Communications Letters
The recent concept of beamspace MIMO can utilize beam selection to reduce the number of required radio-frequency (RF) chains in mmWave massive MIMO systems without obvious performance loss. However, as the same beam in the beamspace is likely to be selected for different users, conventional beam selection schemes will suffer from serious multiuser interferences, and some RF chains may be wasted since they have no contribution to the sum-rate performance. To solve these problems, in this letter, we propose an interference-aware (IA) beam selection. Specifically, by considering the potential multiuser interferences, the proposed IA beam selection first classifies all users into two user groups, i.e., the interference-users (IUs) and noninterference-users (NIUs). For NIUs, the beams with large power are selected, while for IUs, the appropriate beams are selected by a low-complexity incremental algorithm based on the criterion of sum-rate maximization. Simulation results verify that IA beam selection can achieve the near-optimal sum-rate performance and higher energy efficiency than conventional schemes.
10 August 2018 in IEEE Transactions on Antennas and Propagation
In this communication, the novel compact tightly arranged pairs are employed to form a $4 \times 4$ multiple-input-multiple-output (MIMO) system and an $8 \times 8$ MIMO system operating at 3.4–3.6 GHz for fifth-generation (5G) mobile phones. Each tightly arranged pair is composed of a bent monopole and an edge-fed dipole with a compact size of $7 \times 12$ mm 2 . The orthogonal-mode method is presented to mitigate the mutual coupling of the tightly arranged pairs without any external decoupling structure. With the help of the orthogonal mode, isolation performances across the desired band of the $4 \times 4$ MIMO system and the $8 \times 8$ MIMO system are better than 20 and 17 dB, respectively, with the elements closely spaced. The measured efficiencies are 51.7%–84.5%/49%–72.9%, and the measured envelope correlation coefficients are less than 0.06/0.07 for the $4 \times 4/ 8 \times 8$ MIMO system. The proposed MIMO systems provide a promising solution to compact 5G MIMO mobile phone antennas with good isolation and diversity performance.
8 January 2020 in IEEE Transactions on Antennas and Propagation
In this article, a novel self-decoupled multiple-input multiple-output (MIMO) antenna pair with a shared radiator is proposed for fifth-generation (5G) smartphones. In our approach, a radiator is directly excited by two feeding ports, and interestingly, the two ports are naturally isolated across a wide bandwidth without using any extra decoupling structures. To offer a deep physical insight of the self-decoupling mechanism, a mode-cancellation method based on the synthesis of common and differential modes is developed for the first time. The proposed self-decoupled antenna pair shows a good isolation of better than 11.5 dB across the 5G N77 band (3.3-4.2 GHz) with a radiation pattern diversity property. Based on the self-decoupled antenna pair, an 8 × 8 MIMO antenna system, constituted by four sets of antenna pairs, is simulated, fabricated, and measured to validate the concept. The experimental results demonstrate that the proposed 8 × 8 MIMO system can offer an isolation of better than 10.5 dB between all ports and a high total efficiency of 63.1%-85.1% across 3.3-4.2 GHz. With the advantages of self-decoupling, shared radiator, simple structure, wide bandwidth, and high efficiency, the proposed design scheme exhibits promising potential for the future highly integrated MIMO antennas for 5G smartphones.
28 October 2019 in IEEE Transactions on Antennas and Propagation
21 July 2020 in IEEE Transactions on Antennas and Propagation
In this paper, a general decoupling method based on a new perspective of common mode (CM) and differential mode (DM) cancellation is proposed. For two closely-spaced antennas, the mutual coupling effect can be analyzed and solved by exciting them simultaneously with in-phase (CM) and out-of-phase (DM) signals. It is theoretically proved that, if CM and DM impedances are the same, the mutual coupling effect between two separated antennas can be totally eliminated. Therefore, we can solve the coupling problem by CM and DM impedance analysis and exploit the unique field properties of characteristic modes to assist in antenna decoupling in a physical intuitive way. To validate the feasibility of this method, two practical design examples, including the decoupling between closely-spaced dipole antennas and planar inverted-F antennas, are proposed. Both design examples have demonstrated that, the proposed method can provide a systemic design guideline for antenna decoupling and achieve better decoupling performance compared to the conventional decoupling techniques. We forecast the proposed decoupling scheme, with a simplified decoupling procedure, has great potential for the applications of antenna arrays and multi-input multi-output systems.
10 July 2012 in IEEE Transactions on Antennas and Propagation
A substrate integrated waveguide (SIW)-fed circularly polarized (CP) antenna array with a broad bandwidth of axial ratio (AR) is presented for 60-GHz wireless personal area networks (WPAN) applications. The widened AR bandwidth of an antenna element is achieved by positioning a slot-coupled rotated strip above a slot cut onto the broadwall of an SIW. A 4 × 4 antenna array is designed and fabricated using low temperature cofired ceramic (LTCC) technology. A metal-topped via fence is introduced around the strip to reduce the mutual coupling between the elements of the array. The measured results show that the AR bandwidth is more than 7 GHz. A stable boresight gain is greater than 12.5 dBic across the desired bandwidth of 57-64 GHz.