Robert R. Mason

Robert R. Mason

Auto-generated profile, based on publicly available information

Robert R. Mason

U.S. Geological Survey

Research Focus & Metrics

Academic Career Length

36Years (1991-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2018
Verified
Report
Closed access
PDF file
JEJohn F. England
John F. England
TCTimothy A. Cohn
Timothy A. Cohn
BFBeth A. Faber
Beth A. Faber
JSJery R. Stedinger
Jery R. Stedinger
WTWilbert O. Thomas
Wilbert O. Thomas
RMRobert R. Mason
Robert R. Mason
Accurate estimates of flood frequency and magnitude are a key component of any effective nationwide flood risk management and flood damage abatement program. In addition to accuracy, methods for estimating flood risk must be uniformly and consistently applied because management of the Nation’s water and related land resources is a collaborative effort involving multiple actors including most levels of government and the private sector.Flood frequency guidelines have been published in the United States since 1967, and have undergone periodic revisions. In 1967, the U.S. Water Resources Council presented a coherent approach to flood frequency with Bulletin 15, “A Uniform Technique for Determining Flood Flow Frequencies.” The method it recommended involved fitting the log-Pearson Type III distribution to annual peak flow data by the method of moments.The first extension and update of Bulletin 15 was published in 1976 as Bulletin 17, “Guidelines for Determining Flood Flow Frequency” (Guidelines). It extended the Bulletin 15 procedures by introducing methods for dealing with outliers, historical flood information, and regional skew. Bulletin 17A was published the following year to clarify the computation of weighted skew. The next revision of the Bulletin, the Bulletin 17B, provided a host of improvements and new techniques designed to address situations that often arise in practice, including better methods for estimating and using regional skew, weighting station and regional skew, detection of outliers, and use of the conditional probability adjustment.The current version of these Guidelines are presented in this document, denoted Bulletin 17C. It incorporates changes motivated by four of the items listed as “Future Work” in Bulletin 17B and 30 years of post-17B research on flood processes and statistical methods. The updates include: adoption of a generalized representation of flood data that allows for interval and censored data types; a new method, called the Expected Moments Algorithm, which extends the method of moments so that it can accommodate interval data; a generalized approach to identification of low outliers in flood data; and an improved method for computing confidence intervals.Federal agencies are requested to use these Guidelines in all planning activities involving water and related land resources. State, local, and private organizations are encouraged to use these Guidelines to assure uniformity in the flood frequency estimates that all agencies concerned with flood risk should use for Federal planning decisions.This revision is adopted with the knowledge and understanding that review of these procedures will be ongoing. Updated methods will be adopted when warranted by experience and by examination and testing of new techniques.

2 October 2018 in Water Resources Research
Verified
Journal Article
Open access
PDF file
JKJulie E. Kiang
Julie E. Kiang
CGChris Gazoorian
Chris Gazoorian
HMHillary McMillan
Hillary McMillan
GCGemma Coxon
Gemma Coxon
JCJérôme Le Coz
Jérôme Le Coz
RMRobert Mason
Robert Mason
Streamflow time series are commonly derived from stage‐discharge rating curves, but the uncertainty of the rating curve and resulting streamflow series are poorly understood. While different methods to quantify uncertainty in the stage‐discharge relationship exist, there is limited understanding of how uncertainty estimates differ between methods due to different assumptions and methodological choices. We compared uncertainty estimates and stage‐discharge rating curves from seven methods at three river locations of varying hydraulic complexity. Comparison of the estimated uncertainties revealed a wide range of estimates, particularly for high and low flows. At the simplest site on the Isère River (France), full width 95% uncertainties for the different methods ranged from 3 to 17% for median flows. In contrast, uncertainties were much higher and ranged from 41 to 200% for high flows in an extrapolated section of the rating curve at the Mahurangi River (New Zealand) and 28 to 101% for low flows at the Taf River (United Kingdom), where the hydraulic control is unstable at low flows. Differences between methods result from differences in the sources of uncertainty considered, differences in the handling of the time‐varying nature of rating curves, differences in the extent of hydraulic knowledge assumed, and differences in assumptions when extrapolating rating curves above or below the observed gaugings. Ultimately, the selection of an uncertainty method requires a match between user requirements and the assumptions made by the uncertainty method. Given the significant differences in uncertainty estimates between methods, we suggest that a clear statement of uncertainty assumptions be presented alongside streamflow uncertainty estimates.

1 January 2008
Verified
Report
Open access
PDF file
JEJeffery W. East
Jeffery W. East
MTMichael J. Turco
Michael J. Turco
RMRobert R. Mason
Robert R. Mason
The U.S. Geological Survey (USGS) deployed a temporary monitoring network of 117 pressure transducers (sensors) at 65 sites over an area of about 5,000 square miles to record the timing, areal extent, and magnitude of inland hurricane storm surge and coastal flooding generated by Hurricane Ike, which struck southeastern Texas and southwestern Louisiana September 12-13, 2008. Fifty-six sites were in Texas and nine were in Louisiana. Sites were categorized as surge, riverine, or beach/wave on the basis of proximity to the Gulf Coast. One-hundred five sensors from 59 sites (fig. 1) were recovered; 12 sensors from six sites either were lost during the storm or were not retrieved. All 59 sites (41 surge, 10 riverine, 8 beach/wave) had sensors to record water pressure (fig. 2), which is expressed as water level in feet above North American Vertical Datum of 1988 (NAVD88), and 46 sites had an additional sensor to record...

12 May 2009
Verified
Conference Paper
Closed access
JKJ. E. Kiang
J. E. Kiang
TCT. A. Cohn
T. A. Cohn
JMJr. R. R. Mason
Jr. R. R. Mason
The accuracy of discharge measurements using velocity meters and the velocity-area method is typically assessed based on empirical studies that may not correspond to conditions encountered in practice. In this paper, a statistical approach for assessing uncertainty based on interpolated variance estimation (IVE) is introduced. The IVE method quantifies all sources of random uncertainty in the measured data. This paper presents results employing data from sites where substantial over-sampling allowed for the comparison of IVE-estimated uncertainty and observed variability among repeated measurements. These results suggest that the IVE approach can provide approximate estimates of measurement uncertainty. The use of IVE to estimate the uncertainty of a discharge measurement would provide the hydrographer an immediate determination of uncertainty and help determine whether there is a need for additional sampling in problematic river cross sections.

1 January 2017
Verified
Report
Open access
PDF file
KRKaren R. Ryberg
Karen R. Ryberg
BGBurl B. Goree
Burl B. Goree
TWTara Williams-Sether
Tara Williams-Sether
RMRobert R. Mason
Robert R. Mason
Annual peak streamflow (peak flow) at a streamgage is defined as the maximum instantaneous flow in a water year. A water year begins on October 1 and continues through September 30 of the following year; for example, water year 2015 extends from October 1, 2014, through September 30, 2015. The accuracy, characterization, and completeness of the peak streamflow data are critical in determining flood-frequency estimates that are used daily to design water and transportation infrastructure, delineate flood-plain boundaries, and regulate development and utilization of lands throughout the United States and are essential to understanding the implications of climate and land-use change on flooding and high-flow conditions.As of November 14, 2016, peak-flow data existed for 27,240 unique streamgages in the United States and its territories. The data, collectively referred to as the “peak-flow file,” are available as part of the U.S. Geological Survey (USGS) public web interface, the National Water Information System, at https://nwis.waterdata.usgs.gov/usa/nwis/peak. Although the data have been routinely subjected to periodic review by the USGS Office of Surface Water and screening at the USGS Water Science Center level, these data were not reviewed in a national, systematic manner until 2008 when automated scripts were developed and applied to detect potential errors in peak-flow values and their associated dates, gage heights, and peak-flow qualification codes, as well as qualification codes associated with the gage heights. USGS scientists and hydrographers studied the resulting output, accessed basic records and field notes, and corrected observed errors or, more commonly, confirmed existing data as correct.This report summarizes the changes in peak-flow file data at a national level, illustrates their nature and causation, and identifies the streamgages affected by these changes. Specifically, the peak-flow data were compared for streamgages with peak flow measured as of November 19, 2008 (before the automated scripts were widely applied) and on November 14, 2016 (after several rounds of corrections). There were 659,332 peak-flow values in the 2008 dataset and 731,965 peak-flow values in the 2016 dataset. When compared to the 2016 dataset, 5,179 (0.79 percent) peak-flow values had changed; 36,506 (5.54 percent) of the peak-flow qualification codes had changed; 1,938 (0.29 percent) peak-flow dates had changed; 18,599 (2.82 percent) of the peak-flow gage heights had changed; and 20,683 (3.14 percent) of the gage-height qualification codes had changed—most as a direct result of the peak-flow file data verification effort led by USGS personnel. The various types of changes are summarized and mapped in this report. In addition to this report, a corresponding USGS data release is provided to identify changes in peak flows at individual streamgages. The data release and the procedures to access the data release are described in this report.

1 January 2014
Verified
Report
Closed access
JOJames E. O'COnnor
James E. O'COnnor
BABrian F. Atwater
Brian F. Atwater
TCTimothy A. Cohn
Timothy A. Cohn
TCThomas M. Cronin
Thomas M. Cronin
MKMackenzie K. Keith
Mackenzie K. Keith
RMRobert R. Mason
Robert R. Mason