The annular folded lens (AFL) is a design form offering large aperture, high-resolution imaging in a very axially compact package. The folded optic can be made monolithic for easier fabrication and alignment, yet the introduction of refractive surfaces with a dispersive optical material gives way to chromatic aberrations. AFL designs using homogeneous media are generally limited to the monochromatic regime, with polychromatic performance greatly reduced. By introducing freeform gradient-index (F-GRIN) media, monolithic AFL designs can achieve higher monochromatic performance as well as provide color correction for diffraction-limited polychromatic imaging. Monochromatic and polychromatic design methodologies are surveyed where the F-GRIN is constrained to remain feasible for fabrication.
Gradient-index Alvarez lenses (GALs), a new type of freeform optical component, are surveyed in this work for their unique properties in generating variable optical power. GALs display similar behavior to conventional surface Alvarez lenses (SALs) by means of a freeform refractive index distribution that has only recently been achievable in fabrication. A first-order framework is described for GALs including analytical expressions for their refractive index distribution and power variation. A useful feature of Alvarez lenses for introducing bias power is also detailed and is helpful for both GALs and SALs. The performance of GALs is studied, and the value of three-dimensional higher-order refractive index terms is demonstrated in an optimized design. Last, a fabricated GAL is demonstrated along with power measurements agreeing closely with the developed first-order theory.
Recent advancements in additive manufacturing have enabled new methods of fabricating gradient-index (GRIN) optics by blending multiple materials in the deposition process. A design study highlighting the advantages of multi-material GRIN optics is presented. It is shown that additional materials in the GRIN allow for higher orders of color correction. A new multi-material refractive index representation, which constrains the GRIN to real materials, is also presented.
This work presents a planar optical light guide design for concentrating solar power onto a photovoltaic cell. The design allows concentrated light injected into the guide to avoid interaction with other injection facets. The presented design has a HFOV of 1°, geometrical concentration of 112.5x at the output of the guide, and can achieve greater than 500x with secondary concentration.
With the advent of 3D printing optical elements, new techniques for manufacturing gradient-index (GRIN) optics have been realized that blend multiple materials in the deposition process. A method to achieve spectral splitting using multi-material GRIN optics is presented. The GRIN is additionally used to generate optical power, allowing for planar entrance and exit surfaces. It is shown that this simultaneous focusing and spectral splitting is not feasible with a two-material GRIN. A comparative design study is then conducted using three and four-material GRIN. A four-material design with optimized materials is also presented to showcase the potential for this new design form.