16 April 2019 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
In this article, an algorithm has been developed to study the influence of hybrid energy storages system management on the performance of this last one in terms of weight, volume, cost and stresses applied to the two storage systems witch compose our source. The main storage system is composed with a high energy or ultra high energy density batteries. Otherwise, the secondary one can be an ultra high power, high power batteries or supercapacitor. Simulation results show that gains in weight and volume are obtained using ultra high energy cells as the main battery or/and an ultra high power as secondary source. The power management is improved to ameliorate the performances of storage system for automotive application.
22 November 2021 in Transactions of the Institute of Measurement and Control
Unmanned aerial vehicles are used today in many real-world applications. In all these applications, the vehicle endurance (flight time) is an important constraint that affects mission success. This study investigates the limitations of embedded energy for a quadrotor aerial vehicle. We consider a quadrotor simple tasked to travel from an initial hover configuration to a final hover configuration. In order to have a precise approximation of the consumed energy, we propose a power consumption model with battery dynamic, motor dynamic, and rotor efficiency function. We then introduce an optimization algorithm to minimize the energy consumption during quadrotor aerial vehicle mission. The proposed algorithm is based on an optimal control problem formulated for the quadrotor model and solved using nonlinear programming. In the optimal control problem, we seek to find control inputs (rotor velocity) and vehicle trajectory between initial and final configurations that minimize the consumed energy during a point-to-point mission. We extensively test in simulation experiments the proposed algorithm under normal and windy weather conditions. We compare the proposed optimization method with a nonlinear adaptive control approach to highlight the saved amount of energy.