10 September 2019 in IEEE Transactions on Industry Applications
The Internet of Things (IoT) concept allows objects to share data through wired or wireless connections for communication purposes. The Industrial Internet of Things (IIoT) is an extended concept of IoT that refers to an integration of data acquisition, communication, and processing on a real-time network. Currently, IIoT has been involved with the development of smart grids in many applications. As the operation of power systems is extremely time-critical, low-latency communication needs to be considered for most control and monitoring applications. Real-time capability of IoT is considered as a key feature for monitoring and control applications of power systems. Therefore, system operators can use the real-time monitoring system to provide better decisions for both technical and financial-related matters. In this paper, a high-speed IIoT-based monitoring system with recording functions is developed and implemented for a power system substation. Due to the high reliability and processing speed of FPGAs, an FPGA-embedded controller is adopted in this system. The IoT platform also provides remote visualization for system operators in real time. This paper mainly aims to provide a practical application that was implemented and tested in a real power substation. The system incorporates the features of an IoT platform with the needs of high-speed real-time applications while using a single high-resolution time source as the reference for both steady-state and transient conditions.
23 July 2018 in IEEE Transactions on Industry Applications
With the wind power energy largely interconnected with power grid, it's necessary to develop a robust dynamic equivalent model of the wind farm for the system stability analysis and control. In this paper, a detailed wind farm model with doubly-fed induction generators (DFIGs) is established according to Western Electricity Coordinating Council (WECC) benchmark test system. Then the parameters identification process based on aggregation technique consisting of a hybrid algorithm combined improved-particle swarm optimization (I-PSO) with improved- genetic algorithm (I-GA) is proposed for dynamic equivalent model development by using the measure-ment data from phasor measurement unit (PMU) at the point of interconnection (POI). Additionally, the robustness of the developed equivalent model is analyzed. The simulation results of the benchmark test system and IEEE-9 bus system demonstrate the effectiveness and robustness of the proposed equivalent modeling and identification methodology.
21 February 2020 in IEEE Industry Applications Magazine
23 July 2019 in IEEE Transactions on Industry Applications
The developing process of the aggregated dynamic equivalent model (DEM) for DFIG wind farms could be less computational and more efficient compared with the multimachine DEM, but less accurate when wind speed differences exist inside the wind farm. In addition, the wind speed differences contributes to the different activation patterns of the crowbar systems of DFIGs. Therefore, a dynamic weighted aggregation modeling approach is proposed in this paper to improve the applicability of the aggregated DEM for DFIG wind farm. Firstly, the Gaussian density distance clustering algorithm is applied to segment the wind speed power curve into different zones such that each segmented zone is corresponded to one equivalent aggregated machine. Then the dynamic weighted aggregation equivalent model could be developed based on the conventional aggregated DEM, where the weighting factors for each generator are calculated according to the Weibull distribution of wind speeds. Different scenarios are simulated in MATLAB/Simulink environment to analyze the applicability of the proposed dynamic weighting equivalent model. The simulation results show the effectiveness of the proposed method.
17 March 2016 in IEEE Transactions on Industry Applications
This paper presents the design of the voltage source converter (VSC) excitation system and an integrated prototype using digital signal processor (DSP) as the core of the excitation controller is developed. Compared with the static excitation systems with thyristor, the VSC excitation system owns one more channel offering positive damping to power system by controlling reactive power of VSC on its ac side, and this approach is approved much faster than field voltage regulation. To design the prototype, the VSC excitation system has to meet the practical condition of the selected synchronous generator (SG) set such as generator capacity, terminal voltage, field voltage and field current. The designed VSC excitation system consists of converters containing a front-end three-phase VSC and a back-end H-bridge chopper, a step-down transformer, and a coordinate excitation controller. Through a series of experiments, it is demonstrated that the VSC excitation system is able to improve both transient stability and steady-state stability limit of power systems. It is a prospective substitute to the conventional thyristor-based static excitation system and an attractive solution to strengthen power system stability as well as increase the capability of long-distance transmission systems.
7 May 2024 in IEEE Transactions on Industry Applications
This study presents a data-driven analysis of a Level-3 EV charging station on a major interstate highway in a northern rural region of the United States, focusing on adherence to the National Electric Vehicle Infrastructure (NEVI) formula program. Utilizing two years of 15-minute smart meter data, this paper presents the power demand dynamics and characteristics of this EV charging station. This study investigates charging trends and behaviors over various time frames, including monthly, seasonal, and weekday periods. The Charging Behavior (CB) index, a novel metric, is developed to quantify and compare charging behavior patterns. Besides, this study investigates the correlation between the power demand of the charging station and the corresponding traffic counts. The result shows that the correlation is particularly relevant in seasonal variations in northern rural areas. The findings from this comprehensive analysis are vital for stakeholders in the power sector, aiding in the strategic planning and optimization of EV charging infrastructure under NEVI compliance, especially in remote regions that have the four-season climate. The study's insights are also crucial for researchers focusing on the sustainable integration of EV infrastructure into existing power grids, addressing both operational planning and demand management.