20 March 2025 in Tendencias en energías renovables y sustentabilidad
El secado solar representa una alternativa sostenible para el aprovechamiento de agroresiduos, al permitir la conservación de productos agrícolas sin el uso de combustibles fósiles. En este proyecto se diseñó y construyó un secador solar indirecto, empleando materiales reciclados provenientes de mobiliario en desuso, con un enfoque en economía circular. El equipo incluye una cámara de secado, un captador solar, y un extractor alimentado por un panel solar que facilita la convección forzada. Para validar su funcionamiento, se realizaron pruebas con agroresiduos de cactáceas como cáscara de pitaya (Stenocereus proinosus.) y cladodios de pitahaya (Hylocereus undatus) obtenidos en la región Mixteca de Puebla. Se monitorearon curvas de pérdida de humedad y parámetros ambientales dentro de la cámara de secado. Los resultados mostraron una eficiencia aceptable del sistema, reduciendo la humedad de los materiales en un periodo de 12 horas. El proyecto integra principios de los ODS 7 y 12, al fomentar el uso de energías limpias y la valorización de residuos agrícolas. Además, su implementación en contextos académicos promueve el aprendizaje práctico y el desarrollo de competencias en tecnologías sustentables.
30 June 2024 in Revista de Ingenieria Innovativa
The scarcity of funds for acquiring industrial-type equipment and devices for laboratory practices at technological universities is a recurring issue. This financial constraint is particularly evident in the educational program of engineering in Biofood Processes at the Technological University of Tecamachalco, where the absence of drying equipment for water reduction practices in fruits and vegetables is a pressing concern. To address this, we have developed a prototype of a convection dryer. The Mechatronics engineering research group has been at the forefront of developing this innovative prototype. Our team has harnessed the power of a PID control system, integrating a microcontroller, a potentiometer for temperature programming, and an-LED screen for real-time monitoring. This stateof-the-art design is a testament to our commitment to advancing laboratory equipment. If the temperature is reduced, the installed electrical resistances will be activated. If the upper limit of the programmed temperature is exceeded, an air extractor placed in the upper part of the prototype will be activated to reduce it as necessary.After rigorous testing, we conducted three water reduction tests on apples with the guidance of food engineering experts. The apples were subjected to a temperature of 60 °C for approximately two hours, a condition necessary to prevent any deterioration. In all three tests, we successfully reduced the water activity from 70% to 12%, a crucial step for preservation. With the successful completion of the tests, the prototype was transitioned to the Food Engineering laboratory, ready for practical use. This significant advancement in our ability to carry out laboratory practices offers a promising solution to the lack of industrial-type equipment in our educational program. We are optimistic about the potential impact of this prototype and look forward to seeing it in action.