2 November 2021 in Journal of Optical Communications and Networking
KCKonstantinos (Kostas) Christodoulopoulos
Konstantinos (Kostas) Christodoulopoulos
Time division multiplexing passive optical networks (TDM-PONs) are the most widely deployed optical system solutions in current broadband access networks worldwide. The energy and cost efficiency of both their implementation and operation has reached levels that also make them an attractive option for other cost sensitive communication networks. We discuss how essential features of current TDM-PON specifications can be leveraged to also use them for low latency and high capacity professional services in public and private networks. Also, possible PON architecture evolutions towards added intra-PON communication are outlined that are motivated by the latency requirements of some practical use cases.
8 September 2021 in Journal of Lightwave Technology
The promise of future generations of mobile communication, both 5.5 and 6G, is that of continued increases in capacity and coverage of the wireless communication network together with novel applications demanding higher levels of performance between the mobile devices and their applications on servers in the cloud. In addition, the growing shift towards virtualization of network function itself offers perhaps the most stringent requirements on the network. To continue to offer ever higher capacities and speeds, future networks will be required to further densify addressing capacity and coverage demands through the use of small cells or new radio spectral bands, such as 7-20GHZ or sub-THZ, with inherently shorter range. Therein lies the dilemma. A denser and ever more complex network of access points, with higher speeds and performance, but continued pressure on the deployment and costs. To address this challenge solutions which address all aspects of the End to End network must be considered together the mobile access points, transport networks, deployment options, and edge cloud all contribute equally to the success of the new consumer and industrial applications promised for next generation networks as well as the operation of the networks themselves. In this paper we will outline the expected requirements of next generation networks as well as new technologies and methods which address the simultaneous challenges of higher capacity, lower costs, and reliable deterministic performance.
6 December 2022 in Journal of Optical Communications and Networking
As we enter the B5G/6G era, the converged Access and Metro segments are facing multi-faceted challenges including the heterogeneity of technologies, an unprecedented density and scale for the interconnection patterns, dynamic traffic profiles, and the inefficiency associated with the overprovisioning of dedicated connectivity resources. Here we present a generic, yet comprehensive, architecture that addresses these challenges. Then, we report the principle of operation of a converged wireline–wireless Access and Metro testbed that exploits such an architecture where the wireline part is exclusively based on nondedicated connectivity resources. The wireline part of the testbed is constructed by means of standardized passive optical network (PON) data planes such as an XGS-PON and a GPON in the Metro and Access network segments, respectively. The converged testbed is controlled by means of an intelligent software-defined-networking-enabled slice manager that allows the creation of new types of quality-of-service (QoS)-aware end-to-end connectivity slices by adjusting in real time the configuration of the wireline technologies to the changing traffic parameters of a WiFi terminal. The end-to-end operation of this testbed is presented, and the specifics of this end-to-end slicing are detailed. The end-to-end QoS-aware slice creation is demonstrated by measuring the response time of the control plane, the corresponding service setup/recovery time, and the round-trip latency performance. A control-plane latency of and a service recovery time of are measured in all cases. Finally, the benefits of QoS-aware slices in the wireline part are quantified from the ability of the testbed to concurrently share bandwidth when needed, while maintaining an acceptable latency performance.
20 September 2017 in Journal of Lightwave Technology
For emerging TWDM-PON systems, based on burst-mode operation over WDM channels, a main challenge is the laser self-heating during bursts. This effect creates a drift of the emission frequency, leading to degraded transmission performances, and perturbation of adjacent channels. We explain an accurate method for characterization of wavelength drift during bursts at a bit time level, and use this method along the paper to characterize frequency drifts in burst-mode operation. First, we present an optimized directly modulated laser design for reduced self-heating, compatible for 100GHz-spaced systems. Then we propose a new solution based on counter-heating of the laser with a side heater, enabling to reduce self-heating induced frequency drift. This counter-heating scheme is applied to a standard laser, demonstrating a stringent reduction of frequency drift, and making it compatible for 100GHz-spaced TWDM-PON transmissions. This simple method opens the way for simple low-cost transmitters in dense and high power TWDM-PON systems.
29 January 2024 in Journal of Optical Communications and Networking
KCKonstantinos (Kostas) Christodoulopoulos
Konstantinos (Kostas) Christodoulopoulos
A time-division-multiplexed (TDM) passive optical network (PON) that behaves like multiple point-to-point (P2P) links can support applications with stringent timing requirements while also maintaining the cost benefits of the point-to-multipoint (P2MP) topology. This requires the TDM-PON to provide deterministic performance: lossless transmission and low and constant (with low variations/jitter) latency to selected flows, while also serving other, e.g., best-effort, traffic flows. We demonstrate two approaches for providing deterministic performance over a TDM-PON. In the first approach, we operate the PON asynchronously to its clients and use scheduling that provides upstream bursts at a low and constant period. Jitter compensator gateways (JC GWs) are used to compensate for the jitter introduced by the non-matching PON bursts and the input traffic cycles. In the latter approach, we implement a deterministic dynamic bandwidth allocation (detDBA) process that controls the placement of bursts at each PON frame for selected transmission containers (T-CONTs) that correspond to flows with given traffic profiles. We synchronize and co-schedule the PON with the rest of the network and applications to provide deterministic performance to those flows. As a use case, we study the communication of industrial applications over the deterministic PON system and demonstrate latency below 100 µs and sub-µs packet latency jitter for the industrial flows, while at the same time serving best-effort traffic flows.
5 January 2024 in Journal of Optical Communications and Networking
Passive optical networks (PONs) facilitate small-cell deployments. Back- and midhaul over PON is being deployed today. As opposed to point-to-point optics, PON extends the aggregation gain into the access domain. We explain the steps taken in the mobile and PON industries to enable efficient eCPRI fronthaul over PON. We explain how fronthaul has evolved into a bandwidth-efficient eCPRI and what mechanisms are in place to enable coordinated scheduling decisions of the mobile and PON systems. The recent end-to-end demonstration of coordinated scheduling helps pave the way towards future industry adoption.