1 January 2024 in Shock and Vibration
Blasting is widely used in civil and mining engineering projects, with the side effect of introducing damage to the remaining rock. The damage can be differentiated from the cracks in the remaining rock, which increases the concerns of safety and requirements for rock support. In situ study of crack development remains complicated and costly; therefore, small‐scale blasting experiments are a viable alternative for a detailed investigation of the crack propagation behavior. To fill the gap, this study examined a small‐scale blasting test by investigating the velocity of the cracks implementing the digital image correlation (DIC) technique and avoiding contact methods such as strain gauges. An ultra‐high‐speed camera (UHSC) was used to record the blasting test in a single blasthole rock‐like sample with a PETN cord. The experimental design underwent calibration until achieving the configuration of the equipment while ensuring the safety distance. The developed experimental methodology was tested successfully capturing the crack behavior. The analysis outcomes showed that the raw UHSC data needed to be preprocessed to enhance the tracking of cracks with the DIC method. The findings of the DIC data analysis indicated a fluctuation in the propagation velocity along the cracks (889–1129 m/s), revealing that the proposed methodology positively contributes to the propagation behavior of using the DIC method to track the blast‐induced cracks.
1 August 2026 in Propellants, Explosives, Pyrotechnics
9 February 2026 in Rock Mechanics and Rock Engineering
In mining, tunneling, and other blasting applications, excessive rock fracturing can compromise stability and deteriorate environmental and economic outcomes. Predicting the extent of blast-induced cracks is critical to accurately assess structural damage and optimize blast design. Seven blast tests were performed on 150 × 300 mm cylinders with a central blasthole of 280 mm length. PETN cord (5 g/m) was used, and the decoupling ratios ( f ) of 2.5, 4.2, and 5.0 were achieved by varying the blasthole diameters. In this study, qualitative and quantitative aspects of the induced cracks (number, type, velocities, propagation patterns, etc.) were examined using ultra-high-speed (UHS) photography and 2D Digital Image Correlation (DIC) method. Numerical modeling with LS-DYNA was conducted to simulate the experiments, to expand the analysis from 2D to 3D. The experimental results showed that crack initiation, gas ejection, and damage level decreased when increasing the decoupling ratio; notably, no damage occurred when f = 5. Crack propagation velocity using the DIC results showed $$\overline{{V }_{c}}$$ = (839.40 ± 46.57) m/s. A model for $${V}_{c}$$ from the experimental results was established through curve fitting with a $${R}^{2}$$ > 97%. The DIC analysis enabled the distinction of the fracture process zone and the crack tip location. The numerical modeling results provided a realistic estimation of the cracks and damage compared to the experiments. The experimental and numerical results show that increasing the decoupling ratio reduces qualitative and quantitatively the blast-induced cracks, demonstrating how blast-induced damage could be limited.