1 November 2021 in Renewable Energy
4 May 2018 in Wind Energy Science
In optimal wind turbine design, there is a compromise between maximizing the energy producing forces and minimizing the absolute peak loads carried by the structures. Active flaps are an attractive strategy because they give engineers greater freedom to vary the aerodynamic forces under any condition. Flaps can be used in a variety of different ways (i.e. reducing fatigue, peak loads), but this article focuses on how quasi-static actuation as a function of mean wind speed can be used for annual energy production (AEP) maximization. Numerical design optimization of the DTU 10 MW reference wind turbine (RWT), with the HAWTOpt2 framework, was used to both find the optimal flap control strategy and the optimal turbine designs. The research shows that active flaps can provide a 1 % gain in AEP for aero-structurally optimized blades in both add-on (i.e. the flap is added after the blade is designed) and integrated (i.e. the blade design and flap angle is optimized together) solutions. The results show that flaps are complementary to passive load alleviation because they provide high-order alleviation, where passive strategies only provide linear alleviation with respect to average wind speed. However, the changing loading from the flaps further complicates the design of torsionally active blades; thus, integrated design methods are needed to design these systems.
18 June 2018 in Journal of Physics: Conference Series
Passive Bend-Twist Coupling (BTC) can be used in blades to alleviate loads and generate more Annual Energy Production (AEP). However, BTC is inherently aero-elastic, thus difficult to incorporate into the design with sequential design process. Multidisciplinary Design Optimization (MDO) is an attractive approach for overcoming these challenges. This paper presents the redesign of a 100kW BTC rotor using the MDO rotor design package HAWTOpt2. In the preliminary design phase, MDO was used to assess the differences between elastic BTC (i.e. off-axis fibers) and geometric BTC (i.e. sweep). This work found that aero-elastic design optimization without BTC was able to achieve a 16% improvement, then with sweep a 18% improvement and with material coupling a 17% improvement. Due to the reduced stiffness of off-axis fibers, material coupled designs had more difficulty satisfying the tip deflection constraint. The geometric BTC concept was chosen for the final design. The design optimization was repeated with additional manufacturing constraints. The final design achieved a 12% improvement.
10 June 2021 in Wind Energy Science
We present an analytical model for assessing the aerodynamic performance of a wind turbine rotor through a different parametrization of the classical blade element momentum (BEM) model. The model is named the Radially Independent Actuator Disc (RIAD) model, and it establishes an analytical relationship between the local thrust loading and the local power, known as the local-thrust coefficient and the local-power coefficient respectively. The model has a direct physical interpretation, showing the contribution for each of the three losses: wake rotation loss, tip loss and viscous loss. The gradient for RIAD is found through the use of the complex step method, and power optimization is used to show how easily the method can be used for rotor optimization. The main benefit of RIAD is the ease with which it can be applied for rotor optimization and especially load constraint power optimization as described in Loenbaek et al. (2021). The relationship between the RIAD input and the rotor chord and twist is established, and it is validated against a BEM solver.