23 March 2023 in IEEE Transactions on Applied Superconductivity
In the framework of the NEWGAIN project, which aims to build a second injector with a mass to charge-state ratio A/q=7 for the SPIRAL2 linear accelerator at GANIL, CEA is developing in collaboration with LPSC and GANIL a new superconducting 28 GHz ECR Ion Source Magnet named ASTERICS. The magnetic design is based on an advanced concept of the VENUS ECR ion source operating at Berkeley and the FRIB source under commisionning at MSU. The ion source superconducting magnet consists of a sextupole inside three solenoids to confine the plasma and a shell-based support structure to apply a preload to the sextupole coils. The confinement coils will be made in Nb-Ti and will be operated at 4.2 K. The cryogenic environment will be ensured by liquid helium thermosiphon closed loop thanks to six in-situ cryocoolers. Specific HTS current leads are being designed to power the magnet. A cold integrated He buffer will also allow He almost-lossless quenches. The preliminary design choices of the ASTERICS superconducting magnet are presented here from the magnetic, mechanical and protection design to the cryogenic definition emphasizing the global approach used to obtain the final magnet configuration.
17 January 2024 in IEEE Transactions on Applied Superconductivity
ASTERICS is an Electron Cyclotron Resonance (ECR) ion source designed by CEA, GANIL, and LPSC for the NEWGAIN project in France. The design of the Nb-Ti superconducting magnet is inspired from two magnets built for 28 GHz ion sources (VENUS and FRIB ion sources) and is composed of a sextupole inside three solenoids to confine the plasma. The main improvement in terms of magnetic design comes from an increase of the plasma chamber radius from 71.85 mm to 91 mm aiming at increasing the metallic beam yield at both 18 and 28 GHz. This change in magnetic design leads to an increase of Lorentz forces, impacting the design of the mechanical structure. Like the FRIB ion source, the architecture uses an aluminum shell-based support structure with bladders and keys to compress the sextupole azimuthally, and endplates for its axial compression. The bladders and keys allow a disassembly of the sextupole coils, and an adjustment of the coils pre-stress. The solenoids are wound under tension around an aluminum mandrel acting as a shell for the sextupole pre-load. Interfaces between solenoids and mandrel are designed to allow detachment and low friction sliding during excitation. The scale-up of the support structure, to address the dimension increase, is presented here. The 2D and 3D mechanical models developed to perform the mechanical analysis and the results obtained are detailed along with the preliminary assembly process.
18 December 2023 in IEEE Transactions on Applied Superconductivity
In the framework of the NEWGAIN project (NEW GAnil INjector), a new injector is under development to supply the SPIRAL2 LINAC at GANIL with heavy ion of a mass to charge-state ratio up to A/q = 7. In order to produce this heavy ion beam, a superconducting 28 GHz ECR Ion Source called ASTERICS is under development and its superconducting magnet used for plasma confinement is designed at CEA in collaboration with LPSC and GANIL. The magnetic design of the ion source is based on the well-proved sextupole-in-solenoids configuration used in different laboratories worldwide. The superconducting coils will be in Nb-Ti placed in a He bath cooled by 6 in-situ cryocoolers. A magnetic and protection optimization has been done to meet the NEWGAIN requirements which calls for a bigger plasma chamber than the existing superconducting ECR ion sources while maintaining the same temperature margin in the coils. This paper focuses on the magnetic analysis, the protection studies and the choice of the superconducting conductor for the sextupole and the solenoids. To validate the coil fabrication steps and the assumptions made in the magnetic design, some winding trials have been done. Both simulations and mock-up results are presented here.
5 March 2026 in IEEE Transactions on Applied Superconductivity
A superconducting 28 GHz ECR (Electron Cyclotron Resonance) ion source, named ASTERICS, is currently being developed as part of the NEWGAIN project (NEW GAnil INjector). The NEWGAIN project aims to equip the SPIRAL2 LINAC at GANIL with a new injector capable of producing very intense heavy-ion beams, up to uranium, well beyond the performance of GANIL's existing injectors. For the ASTERICS ion source, CEA is designing a superconducting magnet consisting of a sextupole surrounded by three solenoids to confine the plasma. The design is now well advanced, and the magnet will be manufactured in the industry. During the design phase, CEA conducted several analyses to investigate transient phenomena that may occur in the event of a quench. These studies focused mainly on magnet protection and the development of eddy currents within the thermal screen. For the protection and for the eddy-currents analyses, the simulations have been performed with the transient and multiphysics modules of Opera. These analyses allow us to validate the choices that have been made for the magnet protection and stress the importance to take into account the quench phenomena on the thermomechanical design of the thermal screen and the choice of materials and geometry. This paper will present these analyses along with an update on the ASTERICS ion source development.