To support worker and driver safety, this study conducted a comprehensive literature review to identify methods of enhancing TMA visibility, improving work zone configurations, and ensuring worker safety. To increase TMA recognition, this study observed that the use of a 6-to-8-inch wide yellow and black inverted ‘V’ pattern of retroreflective chevron markings, sloped at a 45-degree angle downward in both directions from the upper center of a rear panel is effective in alerting drivers to work zones. This study also recommends applying amber and white warning LEDs, which flash in an asynchronous pattern at a 1 Hz frequency and are mounted against a solid-colored background for a 360-degree view visible at least 1500 feet from the work zone. In addition, a work zone vehicle configuration consisting of a lead, buffer, and advance warning truck with a buffer space between 100 and 150 ft is suggested to reduce the risk of lateral intrusions and TMA roll-ahead. In parallel, workers should wear high-visibility vests noticeable at a minimum distance of 1000 feet and headwear with at least 10 square inches of retroreflective material. Some intelligent transport systems are also suggested to enhance TMA recognition and potentially minimize work zone fatalities. Application of the recommended guidelines will potentially improve current practices and significantly reduce the occurrence of TMA crashes in construction and maintenance work zones.
In the absence of advanced traveler information systems, commuters tend to select their routes of travel, within a congested network, primarily based on historical average travel times. Typical traffic conditions can be sufficient if a specific day is similar to these average conditions. However, if traffic conditions vary considerably from the norm, historical information may not be sufficient for commuters to make optimum travel decisions. Under these conditions the provision of real-time traffic information could offer significant benefits. Consequently, the proposed research effort attempts to characterize typical variability in traffic conditions using traffic volume data obtained from 31 dual-loop detector stations along a section of 1-66 between Manassas and Vienna, VA during a 3-month period. The detectors logged time-mean speed, volume, and occupancy measurements for each station and lane combination. Using these data, the paper examines the spatiotemporal link and path flow variability on weekdays and weekends. The generation of path flows is made through the use of a synthetic maximum likelihood approach. Statistical analysis of variance (ANOVA) tests are performed on the data. The results demonstrate that in terms of link flows and total traffic demand Mondays and Fridays are similar to core weekdays (Tuesdays, Wednesdays, and Thursdays). In terms of path flows, Fridays appear to be different from core weekdays.