We report detailed studies of the slow relaxation of the photoinduced excess charge carriers in organic metal-insulator-semiconductor field effect transistors consisting of poly(3-hexylthiophene) as the active layer. The relaxation process cannot be physically explained by processes, which lead to a simple or a stretched-exponential decay behavior. Models based on serial relaxation dynamics due to a hierarchy of systems with increasing spatial separation of the photo-generated negative and positive charges are used to explain the results. In order to explain the observed trend, the model is further modified by introducing a gate voltage dependent coulombic distribution manifested by the trapped negative charge carriers.
4 December 2009 in Sensors and Actuators B: Chemical
We demonstrate solution-processed zinc tin oxide thin-film transistors (TFTs) with a patterned-gate configuration. High-k and solution-processed zirconium oxide (ZrO2) was employed to lower down the operating voltage. Devices with recessed and nonrecessed gate electrodes were compared to study the influence of gate surface relief on the performance of the solution-processed thin films. The TFTs with the recessed gate electrode operate at 5 V and have a threshold voltage of ~ 1 V, subthreshold slope of ~ 0.23 V/dec, saturation mobility of 2.5 cm2/V ·s, and on/off current ratio of > 106.
4 December 2017 in IEEE Transactions on Electron Devices
The built-in potential (Vbi) of an organic diode and solar cell is an important parameter that decides the rectification behavior of organic diodes and affects the open circuit voltage and thereby the efficiency of organic solar cells. In this paper, we propose a physics-based model and an experimental method to extract Vbi from current density-voltage (J-V) characteristics. The proposed model is developed by solving the carrier transport and the continuity equations to obtain the analytic equations for charge carrier profile and current density. The proposed method is thoroughly verified using numerical simulation results. Applicability of this method on experimental results is further validated for poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester solar cells. Finally, Vbi is extracted from dark J-V characteristics of fabricated devices.