8 March 2022 in IEEE Communications Letters
In this letter, we consider hybrid beamforming for millimeter wave (mmWave) MIMO integrated sensing and communications (ISAC). We design the transmit beam of a dual-functional radar-communication (DFRC) base station (BS), aiming at approaching the objective radar beam pattern, subject to the constraints of the signal to interference-plus-noise ratio (SINR) of communication users and total transmission power of the DFRC BS. To provide additional degree of freedom for the beam design problem, we introduce a phase vector to the objective beam pattern and propose an alternating minimization method to iteratively optimize the transmit beam and the phase vector, which involves second-order cone programming and constrained least squared estimation, respectively. Then based on the designed transmit beam, we determine the analog beamformer and digital beamformer subject to the constant envelop constraint of phase shifter network in mmWave MIMO, still using the alternating minimization method. Simulation results show that under the same SINR constraint of communication users, larger antenna array can achieve better radar beam quality.
21 April 2025 in IEEE Communications Letters
Since the security is an important issue in integrated sensing and communications (ISAC), especially when the targets also act as potential eavesdroppers, we investigate the secure beamforming design for the reconfigurable intelligent surface (RIS)-aided ISAC system. Aiming at minimizing the worst-case Cramér–Rao bound of the two-dimensional direction-of-arrival estimation of the eavesdropper, we consider the joint design of transmit beamforming and RIS phase shifts subject to the constraints of signal-to-interference-plus-noise ratio (SINR) of each user and the worst-case eavesdropping SINR. To solve this joint optimization problem, we propose an algorithm based on penalty dual decomposition. Numerical results demonstrate the effectiveness of the proposed algorithm.
27 November 2025 in IEEE Journal on Selected Areas in Communications
In this paper, we investigate a covert communication system based on a hybrid active and passive reconfigurable intelligent surface (HAPRIS), where each RIS element can be dynamically configured to operate in either active or passive mode. By dynamically configuring the operational mode of each element, the system can effectively harness the high-gain benefits of the active RIS while simultaneously preserving the low power consumption and enhanced covertness properties offered by the passive RIS. Then, we formulate an energy efficiency maximization problem by jointly optimizing the active/passive mode selection vector, transmit beamforming vector and reflect coefficient matrix subject to the power, covertness and hardware constraints. To evaluate the detection performance of the warden, we further derive a tractable expression of the covertness constraint for the multi-antenna warden. To solve the mixed-integer non-convex problem, we propose a penalty dual decomposition (PDD) scheme utilizing the block coordinate descent method to decompose the original problem into several sub-problems, which are subsequently solved via the Lagrangian multiplier method and the interior-point method. In addition, we investigate a comparative scenario considering the position error of warden. Specifically, we first derive an expression for the estimation error of channel state information (CSI) based on the position error. We then propose a successive convex approximation method to obtain an upper bound on the CSI error, enabling us to formulate a worst-case covertness constraint. Finally, we extend the proposed PDD scheme to such a scenario with the CSI error. Simulation results demonstrate the effectiveness of the proposed schemes.
1 January 2026 in IEEE Wireless Communications Letters
18 February 2026 in IEEE Wireless Communications Letters
With the growing importance of millimeter wave communications in next-generation wireless systems, achieving covert communications with satisfactory data rate has become a prominent research focus. Since the transmit power directly affects both the performance of beam training and the detectability at the warden, power optimization needs to be fully considered in terms of both the communication covertness and effective achievable data rate (EADR). This letter proposes two-stage power optimization schemes, namely, covert communications based on hierarchical codebooks (CC-HC) and covert communications based on adaptive hierarchical codebooks (CC-AHC) schemes, both including the beam alignment and data transmission stages. The EADR is maximized subject to the covertness and transmit power constraints, where the closed-form solutions of transmit power are derived for both stages. Compared to CC-HC, the EADR can be improved by CC-AHC with only slight increase of training overhead. Simulation results verify the effectiveness of both the CC-HC and CC-AHC schemes.