3 May 2023 in Polymer Bulletin
18 September 2024 in Journal of Thermoplastic Composite Materials
For the manufacturing of mechanically strong and lightweight composite aerostructures reinforcement materials (e.g. carbon fibers, CFs) are the most convenient way. Therefore, sizing of carbon fibers is crucial for guiding them into service by protecting the CF’s surface. In this study, a novel sizing agent was developed and effects of this sizing on CFs’ physicochemical as well as surface properties were investigated. The impact on the fiber-matrix interphase behavior was analyzed. Results reveal that the surface free energy of CF was increased from 5.67 mJ/m 2 to 13.13 mJ/m 2 through sizing by enhancing the wettability property of CF. In addition, surface topography analyses indicate that the surface roughness Ra is 3.70 ± 2.59 nm for neat CF; 1.01 ± 0.65 nm for Polyetherimide (PEI) sized CF; and 1.71 ± 1.14 nm for PEI-Polyether ether ketone (PEEK) sized CF. Finally, it was concluded that an increment in the wettability can be related with chemical changes on the fiber’s surface.
27 May 2025 in Makina Tasarım ve İmalat Dergisi
Fiber-reinforced thermoplastic matrix composite laminates pose great potential for current and future aircraft components. Thermoplastic composites' recyclability, long shelf life, resistance to environmental conditions, and high toughness properties are rapidly increasing their application areas. In addition, its environmental hazardous is much lower compared to thermosets. Thermoplastic composites have gained an important position in aviation due to these properties. In this study, some joining methods that can be used for a thermoplastic matrix composite aircraft structure have been experimentally examined. The methods were compared by performing a single lap shear test (ASTM D5868) at the coupon level. In addition, details about a novel ultrasonic welding machine that performs the welded joining method are also given. Results show that the joint strength of thermoplastic composites can be tailored by the chosen method and corresponding parameters.