Protective seam mining is a major and critical regional measure to prevent coal and gas outbursts (CGO) in coal mines. In this study, a novel method for selecting protective seam against coal and gas outburst was studied on the basis of gas geology and rock strata control theories and principles for protective seam mining and relevant regulations, which is that theories of gas geology were used to assess the outburst risk inherent in different seams of this mine, and then make preliminary selection of protective seams, and the technical feasibility of the proposed selection method was then analyzed using the theories and principles for protective seam mining and relevant regulations. The case application study results show that the extraction of the upper protective seam (UPS) caused significant decreases in the predicative indicators of outburst risk in the outburst-prone seam and thereby prevented CGO, and the novel method can provide a theoretical basis for selecting protective seam against CGO.
26 April 2009 in Journal of Coal Science and Engineering (China)
The propagation of acoustic emission (AE) signal in waveguide is quite important for AE-based prediction of dynamic disasters in coal rocks. In this study, based on some relevant theories in wave mechanics, the elastic mechanical model of one-dimensional (1D) waveguide was firstly established, and the relationship between AE source signal and the signal at the waveguide’s receiving end was derived. On the basis of theoretical analysis, numerical simulation and laboratory test schemes were designed; additionally, using the standard vibration source method, AE response in different sizes of waveguides were investigated, the effects of waveguide size of waveguide were concluded, and the application conditions of the established theoretical model were clarified. Numerical simulation results fit well with the laboratory test results. Meanwhile, the effects of the sensor’s installation method on the propagation rules of AE signal were examined and appropriate installation method was determined.