1 October 2019 in Journal of Orthopaedic Translation
The graded porous structures were designed using triply periodic minimal surfaces models to mimic the biomechanical properties of bone. The mechanical properties and bone formation ability were evaluated to explore the feasibility of the design method in bone tissue engineering. The scaffolds were designed using a P-surface with different pore sizes. All materials were fabricated using 3D printing technology and the mechanical properties were tested by an electronic universal testing device. The biomechanical properties were then analyzed by finite element method, while the ontogenesis of the material in vivo was examined by implanting the scaffolds for five weeks in pigs. According to the obtained results, the pore size ranged between 100 μm to about 700 μm and porosity were around 49.54%. The graded porous architectures can decrease the stiffness of implants and reduce the stress shielding effect. In addition, these porous structures can stimulate bone ingrowth and achieve a stable interface between implants and surrounding bone tissues after 5 weeks' implantation. The micro-CT results also demonstrated the obviously bone formation around all the porous structures. To sum up, the triply periodic minimal surfaces based graded porous structure is effective in decreasing the stress shielding effect, promoting early osteogenesis and osteointegration. This is the first research to explore the effect of this kind of porous structures on bone formation in vivo where the obtained results supported the previous theoretical research on the application potential in bone tissue engineering. Porous architecture designed using triply periodic minimal surface models can achieve gradually changed pore size and appropriate porosity for bone regeneration. This kind of structure can mimic the Young's modulus of natural bone tissue, improve the stress transmission capability and dismiss the stress shielding effect. It also can stimulate the early bone integration in vivo and enhance the binding force between bone and implants, which may bring a new design method for orthopaedic implants and their surface structure.
1 April 2020 in Materials & Design
1 July 2019 in Journal of Orthopaedic Translation
The objective of this study is to investigate the biomechanics on the knee components caused by degenerative and radial meniscal tears and resultant meniscectomy. A detailed finite element model of the knee joint with bones, cartilages, menisci and main ligaments was constructed from a combination of computed tomography and magnetic resonance images. Degenerative and radial tears of both menisci and resultant medial meniscectomy were used and two different kinds of simulations, the vertical and the anterior load, mimicking the static stance and slight flexion simulations, were applied on the model. The compressive and shear stress and meniscus extrusion were evaluated and compared. Generally, both degenerative and radial tears lead to increased peak compressive and shear stress of both cartilages and menisci and large meniscus extrusion, and the medial meniscal tear induced larger value of stress and extrusion than the lateral meniscal tear. The peak stress and meniscus extrusion further elevated after the medial meniscus meniscectomy. Distribution of stress was shifted from the intact hemi joint to the injured hemi joint with either medial or lateral meniscal tear. Our finite element model provides a realistic three-dimensional knee model to investigate the effects of degenerative and radial meniscal tears and resultant meniscectomy on the stress distribution of the knee. The stress was increased in meniscal tears and increased significantly when meniscectomy was performed. Increased meniscus extrusion may explain the mechanism for higher stress on the components of the knee. Meniscal tears are the most common damage associated to the menisci, and meniscectomy is often performed to relieve the pain and instability of the knee. The results of our study indicated increased stress on cartilages and menisci, which may lead to early onset of osteoarthritis. This may guide surgeons to preserve more of the meniscus when performing meniscectomy.