24 August 2022 in Journal of Lightwave Technology
We present here results of the Quantum Technology Flagship project UNIQORN in the area of integrated photonics for quantum communication applications. Three distinct integration platforms, namely indium phosphide based monolithic integration, polymer-based hybrid integration and the CMOS-compatible silicon platform, have been employed to manufacture components and sub-systems on chip for quantum communication devices. The choice of different platforms was made to exploit the best characteristics of each platform for the intended quantum communication device. The indium phosphide platform was employed to manufacture a transmitter chip for quantum key distribution featuring laser, modulators, and attenuators. The transmitter chip was evaluated in a QKD experiment achieving a secure rate of 1 kbit/s. The polymer platform was investigated for engineering non-classical light sources. Entangled and heralded single-photon sources, based on non-linear optics, were assembled on the polymer in a hybrid fashion together with waveguides and other passive micro-optical elements. A quantum random number generator, featuring a 70% randomness extraction efficiency, was also fabricated using the polymer integration technique. An array of 32 individual single-photon avalanche diodes, operating at room temperature and featuring an onboard coincidence logic, was coupled to the chip to demonstrate direct detection of photons on the polymer. Finally, a transimpedance amplifier based on gallium arsenide high electron mobility transistors was produced with an exceptional large electrical noise clearance of 28 dB at 100 MHz.
13 October 2023 in Journal of Lightwave Technology
A novel 16×4 crossing-free waveguide routing network on four layers of polymer-based stacked waveguides is presented. The design combines in-plane passive waveguide devices with vertical multimode interference couplers (1×1 3D MMIs) to connect two adjacent waveguide layers. The 16×4 multilayer waveguide routing network (MWRN) is fabricated using multilayer deposition and standard UV contact lithography. A novel fabrication method of multiple waveguide layers that includes a sequence for wafer planarization steps to reduce topographies is presented. These developments lead to a reproducible multi-layer device fabricated on wafer-scale. Our technology enables a high vertical spacing of 21.6 μm (center-to-center) between the top and bottom waveguide layers with a large waveguide-to-waveguide spacing of 7.2 μm (center-to-center). The complex 16×4 MWRN can serve as the crossing-free waveguide routing for a 4×4 3D optical switch.
21 December 2020 in Journal of Lightwave Technology
Second harmonic generation is an efficient way to create coherent radiation at wavelengths that are not accessible with standard laser sources. In this work we demonstrate second harmonic generation from 1550 nm to 775 nm in a polymer photonic integrated circuit via the hybrid integration of a periodically poled lithium niobate crystal. The bulk crystal is inserted in an on-chip free-space section between two waveguide coupled GRIN lenses. Fiber to fiber conversion efficiencies were 0.03 %/W for a continuous wave laser source and 100 %/W for a femtosecond laser source. Furthermore, third and fourth harmonic light at 517 nm and 388 nm was observed.